Box building help needed. THank you.

Ok, so I will buy 2 woofers: Alpine Type-S SWS-1242Ds, now I need the box.


I am reading specs from official Alpine website:
http://www.alpine-usa.com/en/product...&lang=en&tab=F

1)And trying to use program: WinISD beta to design a box. But I do not see "Z", specifications have two (2) of "Le", I also dont see "SPL" and "Pe". So its not working out, maybe this is a bad application for this after all?

2)But I need help with the website-based enclosure designer also, since I dont know wether I need sealed/sealed bandpass, ported, sealed bypass, opt size or optimized response box I need.

3)ALso, what is the difference between Rectangular and wedge enclosures. Does the wedge one have one side slanted?

4)I guess "Volume pad" is the carpeting?

5)WHere do I get "Fb (tuning frequency) (Hz)" for port designer?
How many ports will box require? (Given info above)

And finally,

6)Where do I buy ports, connectors and carpeting to use specifically for these home made enclosures? Wood and perhaps carpet is in Home Depot, but the rest I dont kknwo.



I appreciate the help alot

for you man you should just go buy a box already made

I dont think so.

What im asking is specifics about the program, or a link to a description how to use the web page. The technical building stuff is easy for me and wont be a problem. I need the dimentions.

Ports can be many things. Most people use just a square port. That's why you see someone saying I have 20 square inches of port. That means that the port has a total of 20 sq inches. The carpeting can be bought at walmart in the automotive section. Mine offers some atleast. Or you can look online to order some carpet. RadioShack will have the connections.

Theres a couple of guys on here that design custom boxes for a small fee. I havent seen to many free programs that offer what some other programs have to offer. You can get the terminal boxes off ebay, crutchfield, carpet any auto store lowes has marine carpet in a lot of colors. Volume pad i think there talking about poly-fil, you can get it from walmart its pretty much pillow or animal stuffing its like 2 bucks for a 20oz bag. This slows down the frequency waves from the sub in the enclosure to make the sub feel like its in a bigger box. Look at alpines website they will show you what boxes are ideal for the sub, slot ports are great but they need to be tuned to pretty good level. Sealed is the easiest to make just 6 sides and its a box.

Im sure once paul, mg or fryman get to this thread they will have better info for you.

Pimprolla112 I just noticed your sig, So how do you like to smoke us V8 drivers? Last time I filled the bird up I had to put two hondas in there!

Just messing with you man to each his own

THank you for the informative replies.

Now.... I am willing to pay one with good dual subwoofer enclosure design skill and experience to prove the data needed to build the box. I dont really want to go into bypass with the plexglass and everything, so I would need a standard dual 12" box, made the way it is supposed to be.


If anyone come through with such skills, hit me up.

Appreciate it.

A couple of things the guys on here that build boxes will need to know is 1 what type of music do you listen to, 2 do you want sound quality or the pounding bass, and 3 what vehicle is this box going to be going in and exactly how much space do you have where it will be placed (exact measurements are very helpful). Provide us with that information and I'm sure one of us will be able to either design something for you and send you a cut sheet or build one for you and you buy it.

My hondas in the works engine is sitting in my room on a stand. My daily driver right now is a 89 s blazer with some slight engine work. It was $80 to fill the damn thing up yesterday. I seen that on the back of a civic hatch at nopi last weekend, car ran a 12.2 all motor.

BUt back on topic give some dimensions for your trunk so everyone can get an idea of what kind of room you have.

Im about to buy a 15 inch tumult off my friend for 400 bucks. i need some plans for a box. i have a jeep so room isnt a problem. he told me i should just go with sealed because vented it would be to loud. so who can make me up some plans real quick? how much yall charge? also im lookin for opinons on the best type of box for this sub. vented or sealed?

Squared off boxes better equalize the pressures on the cone, preventing the voice coil from rubbing the magnetic material under high power loads. Slots ports are also better than tube ports for the same reason, and also have less port noise, especially when rounded and/or flared.

I quit chargin' for designs, seein' as I don't need the money. I do build and ship though.

any chance you would send me some plans for a single 15" box? that would be great

A couple of things the guys on here that build boxes will need to know is 1 what type of music do you listen to, 2 do you want sound quality or the pounding bass, and 3 what vehicle is this box going to be going in and exactly how much space do you have where it will be placed (exact measurements are very helpful). Provide us with that information and I'm sure one of us will be able to either design something for you and send you a cut sheet or build one for you and you buy it.
...

Otherwise, just 6 pieces of MDF 17"x17" and screw them all together in a cube, cut a round hole for your speaker, and you have a sealed box.

Need specifics, dude.

I'm not much into the SPL arena, I just build a sealed box of the right size and let it be.

Just pm ngsm13 and be done with it.

Oh great, another one that thinks ngsm13 is god.

Oh great, another one that thinks ngsm13 is god.

Well, lets see here.

Ng can design and build damn good boxes, I've had one designed by him before, and would happily do it again. I trust NG's opinion, he has given me good information in the past, i've bounced a few ideas off of him and he has given me good logical input along with a few of his own ideas. I've also seen enough of his postings, ideas, and crap on the all the other forums to realize he knows what the fuck hes doing.

Well, lets see here.

Ng can design and build damn good boxes, I've had one designed by him before, and would happily do it again. I trust NG's opinion, he has given me good information in the past, i've bounced a few ideas off of him and he has given me good logical input along with a few of his own ideas. I've also seen enough of his postings, ideas, and crap on the all the other forums to realize he knows what the fuck hes doing.
EDIT-Ah fuck it, nevermind. Arguing with the ego's in this forum is like arguing with 17 year olds, they always think they're right and are too damned proud to admit defeat.

EDIT-Ah fuck it, nevermind. Arguing with the ego's in this forum is like arguing with 17 year olds, they always think they're right and are too damned proud to admit defeat.

Go ahead, state your opinion, I would like to hear it. And yes, I do know how to admit defeat or that I was wrong.