VTEC wiring for b16a

OK guys im still waitin on my parts to get here (hopefully by the weekend) and im tryin to get this VTEC wiring and engine harness mess out of the way so i can plug and play once i get the parts. Does anybody have a link to some pictures on pinouts or the best way to make it all look clean? I need a walkthrough cuz im kind of learning it but still dont understand what all i need to wire seperately. Ive got a PR3 ecu and obd0 harnes. but i have some of the obd1 harness from the b16 so i can use some of their pins?? im tryin to make a website to walk ppl thru the swap so any info would be appreciated

http://www.honda-tech.com/zerothread/1508680

you can add your new how to swap a b16 to the many that already exist on an ef.

my parts are still not here!!! they better show up in the morning or im gonna be TO'ed lol i called them today and reamed them for takin so long..i havent driven my car since easter and its killin me..gonna do the timing belt, alternator belt, and ac this weekend if i dont get them..but i really need the car to be ready and reliable by summer for bonnaroo cuz this whole 12mpg in my roommates blazer is killin me

ive gotta make websites in my class for college so im gonna add vids of the install for ppl cuz ive already got some info on it.thanks for the link tho i dont think runnin 5 wires will be hard to figure out

i think this is as simple as it gets. thanks to frodo for the pic i now understand it way better

http://img240.imageshack.us/img240/2689/vtecwirng7ht.jpg (http://imageshack.us)
and of coarse your knock sensor will need to be wired along with a second o2 sensor if you havent done that already

ok call me crazy but i only saw one o2 sensor on the engine, and connected to the factory header. The aftermarket header only had one sensor bung too..hmmm

do you kno what pins the knock will be wired to?? thanks for the pic thatll help me a lot this weekend when i finally get home to do some more work on it.

Hehe, go me! LOL..Oh, and this is even better, wll help along with the picture. And you may have to have a bung welded into the exhaust system, not expensive. Or you could splice one O2 sensor into both c8 and c16..but I wouldnt recommend.
http://www.hasport.com/Tech/Wring/88-91%20Civic%20Si%20to%20B16.PDF

hey frodo that link didnt work so lemme kno what it is. does my d16a6 harness have two o2 sensors?? im not sure cuz im at school still. the b16 harness only has one that i remember cuz i only had to unplug one from the stock header when i put the new one on.

calling the company in an hour to tell them if i dont get my parts soon im calling the bbb in cali and reporting them..i wish my parts were here..

well there should be two of them. the new ecu should have the 2nd o2 sensor pinout from the ecu. its really simple dont let all the crap confuse you. or was that just me? i would get frustrated and want to give up. here is some more help for this link you will have to scroll down to under the EF section. it will tell everything. good luck with it
http://b16a.honda-perf.org/theswap.html

B16 has two 02's...d16 has one. the second one is in c08. Hasport's site seems to be down, probably why the link didnt work.

yeah i always found links to hasports help section but never went dorect from the site. i could never find the crap on the page