looky at the FMIC

http://cgi.ebay.com/ebaymotors/28-x7-x3-FMIC-TURBO-INTERCOOLER-240SX-S14-S15-S13-GTIR_W0QQcmdZViewItemQQcategoryZ33742QQitemZ806862 8393QQrdZ1


what you guys think? I still need to get piping =(



hmm still not running bigger than 390's I really shouldn't keep ignoring that issue, but it is a sweet deal.

How much psi you plan on running? It says max psi is 30. Thats m only attention getter. When i baught my FMIC it was tested at 80 psi. But i do not se any description in this one as to what they tested it at.

i'll never run over 22 ever.. the highest I might go is 20 even. And until link and injectors I wont push over 14-15

Well shit!!! Thats a very sweet deal for that FMIC for your needs. Hell for my needs to lol. Im shooting for around 22-25psi at the track when im done with my car hopefully soon!!!. Wish i would have seen this deal :(

they sell more than one =)

I bought one from them about 2 months ago and i still dont have any piping lol!!!! I guess thats what happens when you are broke.
Does anyone want to donate some piping? HA HA

Anyway I think that it will work out for what I want to do. good find in my opinion.:2cents:

I was looking at a similiar core when I wanted to get a fmic. Looks good even though it is the no namer brand. For 70 bucks hell, I would try it.

pretty much the same thing I have except mine is 25x12x3

yah piping is a bitch to get, damnit.. anyone know a good write up on piping for 1G with the inlets at the bottom of the intercooler

just do what I did
Get 3 or 4 2.5" U-bends from summit they are $20 each and you can cut them and they fit perfect. If you want pics or details or anything let me know and I'll do another write up

just PM, with it if you already did the write up, if not a newer write up is nice, I do have a 1g remember =P

actually if you're only going to run 14-15 psi, I see no need for a fmic. I would put this money towards link for now.

With 390's, you could flow enough air through the SMIC to max it out, none the less the fmic. I agree with crunchy and get link or something more valuable right now than a fmic.

just do what I did
Get 3 or 4 2.5" U-bends from summit they are $20 each and you can cut them and they fit perfect. If you want pics or details or anything let me know and I'll do another write up

Is this the ones you got?

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SUM%2D622003&N=4294923429+115&autoview=sku

Yah I totally agree with you guys about saving the money and stuff but, It needs to be on soon because the stock intake pipes are fucking shit. espically uicp, it is defenitly restricting flow, and I am pretty sure there is a small little hole where there is the intercooler hose connection. Plus my side mount is jb welded for an unknown reason, know the fuck heads that had my car before me, it doesn't sound good. They drilled holes in the BOV then jb welded it as well. (switched with ez though) I realize that it may seem like a waste of money now, but, the way things are slowly going bad on the stocker intercooler, I rather have this for now and start saving for link afterwards, thanks for the opinion though. im only running 14-15 psi until link and injectors, so roughly a month, not too long.

I need to find pipes now damnit and couplers, sdggsddgdgssgd

i bought a kit off ebay for 695 came with piping and the whole 9 yards and they even made it so my gm maft would install right in. the best part i like is that the intercooler is highly rated and the inlet and outlet are on the back side so my piping was as short as routing as could be and fit way better than my buddies side outlets

Damn though 700 for and intercooler? Thats a lot. I mean now it's a lot a couple years ago that would have been a bargain. Aaron I'll help you with the pipes do like pr said get 4 bends and some straight pipe, I have the chop saw so we can cut the well and if you want we could even weld most of the joints.

yah, First things first though, I gotta get you money to order some exhaust shit for my car..

Why would you need to fix your exhaust?

Im going to punch your throat, didn't you remember the drive home at all?