thinking about rebuild....help??

well ive been considering buying and 89-93 lx or gt w/ a 5.0 and rebuilding it. ive found a few rebuild kits im interested in and i was just wandering if any experienced people could look over my selection and tell me about how much horse power ill be making and possibly tell me what ill run on the quarter. thnx

here is the rebuild kit
http://store.summitracing.com/partdetail.asp?part=FEM%2DMHP173%2D300&N=4294925232+4294919598+4294840126+4294870280+115&autoview=sku

here is the cam
http://store.summitracing.com/partdetail.asp?part=CCA%2D31%2D255%2D5&N=4294925232+4294924497+4294887637+4294840126+4294 887598+115&autoview=sku

well i thank you for any input u can give me...and ill be runnin a stock automatic transmission. i also intend to put a bigger carb and intake manifold on it...along with headers and 3" pipe on the exhaust. then 40 series flowmasters.

Well if you bought a 5.0 car and rebuilt it with that kit you would have to have the block bored .030. The pistons in the kit are for a 4.030 bore. That would give you 4 more cubic inches (306). The cam you have selected is very small. But if you are using stock heads then you wont need much more cam. If you are going to convert it to carb then I would suggest a Weiand Action+Plus intake, or a Edelbrock Performer intake. For the carb I'd suggest a Holley 600cfm double pumper.

Here are two carb choices I would suggest:

Rebuilt by Holley http://store.summitracing.com/partdetail.asp?autofilter=1&part=HLY%2D65%2D4776&N=4294925239+4294839063+4294919007+400178+42948916 81+1051506942+4294902704+4294785105+115&autoview=sku

New Holley http://store.summitracing.com/partdetail.asp?autofilter=1&part=HLY%2D0%2D4776C&N=4294925239+4294839063+4294919007+400178+42948916 81+1051506942+4294902704+4294785105+115&autoview=sku

I'd pay the extra $30 for a new one but thats your call.

Here are a couple intakes that would be good for you:

Edelbrock http://store.summitracing.com/partdetail.asp?part=EDL%2D2121&N=4294925239+4294839079+4294822065+4294908331+4294 840126+115&autoview=sku

Weiand http://store.summitracing.com/partdetail.asp?part=WND%2D8011&N=4294925239+4294839079+4294822065+4294908331+4294 840126+115&autoview=sku

Almost forgot...

As far as the power with this motor, 306, 10:1cr, small cam & intake, stock heads..I'd say you could make 300fwhp with a good tune. Through a stock AOD with stock converter you will have a pretty sweet little setup. I'd say you could run high 13's on a cool night with a good launch and skilled driving.