2.0 4g63 throttle bodys
boyertownMidnight
05-19-2006, 06:49 PM
what are the main differences between the throttle body & injectors from the 1g turbo and the 2.0 non turbo?
Talon69
05-19-2006, 08:43 PM
Here is the difference.
http://www.roadraceengineering.com/2gtbswap.htm
Injectors are the same i believe
http://www.roadraceengineering.com/2gtbswap.htm
Injectors are the same i believe
95_GSX
05-19-2006, 09:00 PM
but isn't the 90-94 n/a TB 62mm?
gthompson97
05-19-2006, 09:10 PM
I think all the 1g 2.0 throttle bodys are the same size (60mm) versus the 2g throttle body (54mm)
scottsee
05-19-2006, 09:10 PM
the N/A 2.0l 1g's have a 62mm lip that eliminates the need for a throttle body elbow. You just stick a 90deg 4ply coupler on their and stick it to your UICP. The N/A do require you to chage out the seal inside the TB. It's explained in the Vfaq
kjewer1
05-20-2006, 02:11 AM
Yes, the NT TB is the same throttle bore size as the turbo model. I measued them both. But the elimination of the TB elbow is nice if you are running 3" pipes. I found one inch of 2 ply 2.75" coupler makes the perfect spacer to fit up a 3" coupler. The seals do need to be swapped.
Thor06
05-20-2006, 02:52 AM
Correct me if I am wrong, but didnt NT 1g's come with 390cc injectors instead of 450's?
kjewer1
05-20-2006, 03:17 AM
The turbo ATs had 390s, I know that. I'd be surprised if the NTs injectors were that big, but I can't say for sure, no experience with those cars.
scottsee
05-20-2006, 04:50 AM
Yes, the NT TB is the same throttle bore size as the turbo model. I measued them both..
Me too.. The throttle plate it self is 60mm, but the lip expands out to 62-63mm..
Me too.. The throttle plate it self is 60mm, but the lip expands out to 62-63mm..
Automotive Network, Inc., Copyright ©2025