FMIC Help

Guys I got the FMIC on without cutting or removing the fogs or any part of the bumper. The FMIC little tilted but you cannot really see it. I got supports for it and everything and it looks great. Now for the problem.

I got those intercooler pipes at home.

http://cgi.ebay.com/ebaymotors/2-5-Intercooler-Piping-Pipe-Eclipse-Lancer-3000GT_W0QQcmdZViewItemQQcategoryZ33742QQitemZ8065 848211QQrdZ1

How am I suppost to install the ones from the intercooler to the intake manifold. I got a Greddy Type RS from DSMtunners and the flange for it. I wanted to see how you guys intall it or if you can find some pics or write up on the net. I can figure out a way to do it but didnt want to go through all the hassle if there is a simple way. I was looking on the net for write ups but cannot find anything. I want the car to be running soon and I have everything completed excepty the pipes.

Than you

Number one thing, don't use those couplers cause they will likely blow off. You will probably be good with those worm gear clamps on your 16g though. To put the flange on I would just go to a muffler shop and have them weld it on. I would guess it'd be like < $30. If you want to know how to route the pipes, just go from the left side of the IC and then follow where the stock piping came from to the mani, or for short route piping just go straight from the IC outlet up to the manifold (should be like one sharp 90* bend and a 45* or less, and a curved coupler).