engine stalling after rebuild

i have a 92 tsi awd, i just replaced everything in the upper part of the motor including a brand new 6 bolt head, hks head gasket, arp everything the whole nine yards. now i made sure everything lined up timing wise and all that replaced all the timing components and stuff but it stalls after idling for like 2 seconds
any ideas

Did you check the compression, spark and fuel?

is your cam sensor off 180 degrees?

yea compression was 195 in all cylinders and the spark and fuel were all great, so i will check my cam angle sensor tommorrow when i get off work i didnt get a chance to do to much with it, it poured all day.

it poured all day.

That's why we have what one would call a "building", it keeps you dry. :lol:

also may want to put a noid light ont he injectors to see if they are firing when you crank it... if that is weird its eithe ryour ecu or mpi or mfi relay...

:lol: Well not everyone has a fucking "building" ok?

Ignition timing thats off will cause a shitty/no idle and stalling wont it?

no whats shitty is i just bought this house and when i did the garage needed repaired and the neighbors compalined and before i even moved in the county tore it down and left me with nothing.

but its fixed the line to the pcv valve was off and i turned the cam angle sensor 180 and it fired up and with barely any adjustments idles perfect at like 750 thanks guys for the help