Civtegra coming together

With help from alot of people, and many hour put in, the civtegra is starting to come together again. The new fenders have been put together... many thanks to brad and mike, and here is what it looks like so far.


The gaps still need working, bolts be put back in, oh and did i forget a new hood, bumper, and paint....


http://img395.imageshack.us/img395/9400/14050608327nu.jpg

http://img447.imageshack.us/img447/1737/14050608336oj.jpg

looks better than the last time i saw it.

post up some pics of under the hood, i'd like to see how you mounted the lights.

It looks clean man. Everything fits together nice and snuggly. So you used a civic bumper with teg hood, fenders and lights? Did you bondo the top part of the bumper that is between the headlights? Anyways good work, any plans for paint?

Not sure if you remember, but the entire rad support is off of an integra, so the front end is extended by about 4 inches, which should be nice for the turbo install as i now have a tonne of room

As for the lights I took an angle grinder to the mounting points of the usdm cage, and bolted them up with the jdm lights. On the top, i customed some mounts out of sheet to space them from the rad support.

ok the parts are as follows:

Teg rad support
civic and teg fenders, cut, and welded together
jdm teg headlights
usdm (soon to be JDM) teg bumper
teg hood

it took alot of measuring, cutting, welding, spacing and redoing all of the above to get it to fit

after bolting up

http://img118.imageshack.us/img118/8804/14050619092wg.jpg

the z3 ones were glass interim ones for 18 months... so don;t worry, the only thing that they will be going on is the scrap pile

cool! i still want under the hood pics!

Looks pretty cool.

how did u do the fenders? i remember doin a 00 teg front end on a 94 civic coupe for someone and i did the rad support and all but the fenders needed to be customized to line up n fit so the doors would open n everything would line up.

I had the rear of the civic fenders welded to the front of the teg fenders...

yea thats what i did, welded it almost in the middle of the fender wheelwell, jus took some time to make sure everythin looked smooth and was the right size

slammedcivicsi off of here did all of the fender work once it had been welded, and it is amazing

Looks like a cross eyed civic thats been slapped on the nose. But... looks pretty good.

theres a guy on car domain who lives in hawaii that has a new front end on a 4th gen hatch.

the integ8ed one yeah... it is a nice car... i would have gone with the jdm teg front end, but that is just me, still a killer car though

yea i love the look of the jdm front end

have progress pics?

interesting. I like it. :)