Garrett GT35R info please!!!!

What do you guys know about the Garrett GT35r's spool up rate....at what RPM range does it begin to spool?
Also, anyone have this setup? or know any good or negative things about it?

Thanks

On your FWD, you would never hook up. You'd need slicks like 10 feet wide ;).

On your FWD, you would never hook up. You'd need slicks like 10 feet wide ;).

I want to have it at 400-500...then later on do more mods and geti t up higher...

LSD should be mod with htis turbo huh

Yeah. Actually, I would go LSD for any FWD. If you get some wide rims and decent slicks and the LSD you should be ok.

umm... IIRC, spooling begins @ 4500? ish, full boost by 5k, fuel cut @ 7200, whats the point? get a 60 trim for your power goal... pleanty of play room...

4400-4500 rpm on a 2 liter, 37-3800 on a stroker.

I don't like anything above a 50 trim for the older garret t04 stuff. The 54, 57, and 60 trim turbos never impressed me. The 60-1 is a poor fit too but does well usually. For the newer GT stuff something like a 3076 (GT12) will do very well for most poeple with a limit of 55 lbs/min. Problem is there is nothing that fits in between that and the 65 lb/min 35R (GT14). There is a BB version with what appears to be a 60-1 wheel, which should come in around 60-62 lbs, but only a small spool advantage over the more appropriate 14 wheel.

I have a brand new GT3076R (GT12) BB turbo for sale if you want it...