Best Intercooler kit
3000gtsl
05-07-2006, 03:16 PM
What is the best intercooler kit for a vr4? That can suport about 600hp?
Answer the poll.
Answer the poll.
Hotshot8792
05-07-2006, 04:11 PM
I voted other.
In my opinion, I would get a Custom Coach 14 inch front mount for the 3/S's, polished, single in and single out, then get the piping from PPE Engineering. Of course, you can get the entire kit from PPE engineering, but what i stated is the second most cost effective and good quality. The most cost effective and good quality is to get a custom coach 14 inch front mount and make your own pipes.
In my opinion, I would get a Custom Coach 14 inch front mount for the 3/S's, polished, single in and single out, then get the piping from PPE Engineering. Of course, you can get the entire kit from PPE engineering, but what i stated is the second most cost effective and good quality. The most cost effective and good quality is to get a custom coach 14 inch front mount and make your own pipes.
AutostradaVR4
05-07-2006, 08:33 PM
Personally, i like the HKS duals in the stock locations. I dont know if that can support the power, though. Too bad its so expensive.
xXxRocker5150
05-07-2006, 09:17 PM
what kinda numbers do modified DSM side mounts flow???
Igovert500
05-07-2006, 09:49 PM
I've heard the HKS sidemoounts have some fitment issues. Plus I wouldn't spend that much on sidemounts. For that price go with a front mount.
The DSMs are so close to the HKS in size, and less than half the price.
I don't honestly know exactly where the limitations of the DSMs are. I know Mellon ran low 11s on his (i think). I personally would think they would be fine with any TD04, but would go FMIC with TD05s
If you are serious about 600hp, then I think Hotshot has the best suggestion
The DSMs are so close to the HKS in size, and less than half the price.
I don't honestly know exactly where the limitations of the DSMs are. I know Mellon ran low 11s on his (i think). I personally would think they would be fine with any TD04, but would go FMIC with TD05s
If you are serious about 600hp, then I think Hotshot has the best suggestion
richard petrus
05-07-2006, 11:34 PM
I've heard the HKS sidemoounts have some fitment issues. Plus I wouldn't spend that much on sidemounts. For that price go with a front mount.
The DSMs are so close to the HKS in size, and less than half the price.
I don't honestly know exactly where the limitations of the DSMs are. I know Mellon ran low 11s on his (i think). I personally would think they would be fine with any TD04, but would go FMIC with TD05s
If you are serious about 600hp, then I think Hotshot has the best suggestion
Where can i find that intercooler? Can you give me the website?
The DSMs are so close to the HKS in size, and less than half the price.
I don't honestly know exactly where the limitations of the DSMs are. I know Mellon ran low 11s on his (i think). I personally would think they would be fine with any TD04, but would go FMIC with TD05s
If you are serious about 600hp, then I think Hotshot has the best suggestion
Where can i find that intercooler? Can you give me the website?
Hotshot8792
05-08-2006, 12:10 AM
what kinda numbers do modified DSM side mounts flow???
DSM sidemounts actually outflow the HKS by quite a bit. I forgot the exact numbers, but the DSM sidemounts are much better than the HKS upgrades.
DSM sidemounts actually outflow the HKS by quite a bit. I forgot the exact numbers, but the DSM sidemounts are much better than the HKS upgrades.
Hotshot8792
05-08-2006, 12:11 AM
Where can i find that intercooler? Can you give me the website?
www.speedpartsrus.com (Custom Coach) just e-mail them for getting an intercooler for the 3000GT/Stealth cars
If you want to know what the custom coach 14 inch front mount looks like, look in my sig, and also check out my project update thread, there's a picture or two of it mounted without the front bumper on
www.ppeengineering.com (PPE Engineering)
www.speedpartsrus.com (Custom Coach) just e-mail them for getting an intercooler for the 3000GT/Stealth cars
If you want to know what the custom coach 14 inch front mount looks like, look in my sig, and also check out my project update thread, there's a picture or two of it mounted without the front bumper on
www.ppeengineering.com (PPE Engineering)
mehrshadvr4
05-08-2006, 05:02 PM
i have a custom made FMIC.it's big too.i mad it by my self.it works great and i saved about $700
Automotive Network, Inc., Copyright ©2026