Need a measurment
TheSilentChamber
04-29-2006, 01:19 AM
Anyone have the size of the hole for the cam pully?
TheSilentChamber
04-29-2006, 01:45 AM
Lazy bastards, I went ahead and went and measured it, incase anyone wants to know its 13/16ths
civic_boy91
04-29-2006, 08:37 AM
....ok but why did you need to know.
are we gonna have TSC cam pullys or something?
are we gonna have TSC cam pullys or something?
TheSilentChamber
04-29-2006, 09:47 AM
Hum.
TheSilentChamber
04-29-2006, 03:00 PM
....ok but why did you need to know.
are we gonna have TSC cam pullys or something?
No its for another car I'm working on, an adjustable cam gear for a second gen Ford Escort 1.9 liter is around 300 bucks, only one company makes them. But I happend to notice that the cam gears were about the same size and upon further inspection they are the same tooth count and use the same size belt cogs. The cam in the escort has a diamiter of 15/16th, and I was looking for the diamiter of the civic cam (which turned out to be 13/16ths), so all I have to do is drill out the center and cut a new keyway. Adjustable cam gears for civics, as we all know are cheep as donkey shit, and with a few minutes it will easly modify into one that would cost me around 300.
are we gonna have TSC cam pullys or something?
No its for another car I'm working on, an adjustable cam gear for a second gen Ford Escort 1.9 liter is around 300 bucks, only one company makes them. But I happend to notice that the cam gears were about the same size and upon further inspection they are the same tooth count and use the same size belt cogs. The cam in the escort has a diamiter of 15/16th, and I was looking for the diamiter of the civic cam (which turned out to be 13/16ths), so all I have to do is drill out the center and cut a new keyway. Adjustable cam gears for civics, as we all know are cheep as donkey shit, and with a few minutes it will easly modify into one that would cost me around 300.
Automotive Network, Inc., Copyright ©2026