'96 Rt Frt Side Turn Signal Bulb - How to Replace?

Need to replace the right front side turn signal bulb.

There appears to be a plastic cowling surrounding the area to flush the engine compartment.

Is there an easy way to get the bulb changed in my driveway - or do I need to use a lift so that I can see what's going on?

Thanks -

No need for a lift ( if your skinny). You'll need to pry the black plastic retainers out, there may be 8 or so. after that the bulb is easily accessable.
You will more than likely need to buy new plastic fasteners at your local auto parts store. This job is very, very easy

No need for a lift ( if your skinny). You'll need to pry the black plastic retainers out, of the plastic splash valance There may be 8 or so. after that the bulb is easily accessable.
You will more than likely need to buy new plastic fasteners at your local auto parts store. This job is very, very easy