Help with my axles

i need to know if these will work on the ls tranny i will be getting. it looks like they are the same now that i look closer but i think i need a difirent drivers side axle or intermidiate shaft. please help me i am confused
http://img505.imageshack.us/img505/3042/imag00034um.jpg (http://imageshack.us)

Wow those damn things are just plain grody dude...Looks like the top one blew up once upon a time..

What car are those axles off of, 90-93 teg? They look pretty worn, the top one may have a raped joint with just a new cv boot and the bottom one looks like it will tear shortly.

they are off of a 90-93 teg like you said and i cant figue out how i would get either of them on the shaft. i know one goes into the tranny but wich goes into the shaft and how?

One end of the intermediate shaft plugs into the tranny, at the opposing end of the shaft you should plug in the drivers side axle. The passenger side axle should go into the tranny. Do you know which axle is passenger which is driver side?

the top one is the driver side but look at it there is no way you could put that inside the intermidiate shaft or vice versa. please let me know how to fix this problem i am so close to getting my beutifull (to me anyway) crx beatin mustangs

i need to know if these will work on the ls tranny i will be getting. it looks like they are the same now that i look closer but i think i need a difirent drivers side axle or intermidiate shaft. please help me i am confused
http://img505.imageshack.us/img505/3042/imag00034um.jpg (http://imageshack.us)
The top axle is a 90-93 integra driver's side axle, non-abs.
The bottom axles is a 92-93 integra passenger side axle, w/ abs.
The half shaft is a 94+ integra half shaft. You will need the 90-93 half shaft with those axles.
90-93 halfshafts have the female end, whereas the 90-93 have the male end as pictured.
You are going to need to remove the ABS ring on that passenger axle to get it to fit perfectly. It is not a must, but recommended.

i am so close to getting my beutifull (to me anyway) crx beatin mustangs

Good luck with that... vid footage would be nice too.

Good luck with that... vid footage would be nice too.

hopfully I can get some footage of me doing that this summer :grinyes:

oh man would that be great. its always nice to see mustangs gettin whoped on by 4 bangers. and you should post or send me the video link when it haooens. i will do the same. layta

Yeah and either way, that int. shaft is pretty damn screwed up man. Just look at it! The ring on the end of the shaft is warped and bent..it looks as is if has over 300k miles on it! And then got crashed lol!

no that was me hitting it back on with a hammer. i am gonna get a new one tho. 0 93 but could take a while

no that was me hitting it back on with a hammer. i am gonna get a new one tho. 0 93 but could take a while
I can get you as many as you want at $50-$60 shipped. let me know.
I know too many damn people in this business and got the hookup on everything you can possibly imagine.

for the int. shaft. or the drivers side axle

for the int. shaft. or the drivers side axle

for the shaft. I can get the axles for about 40 each used as well.

for the shaft. I can get the axles for about 40 each used as well.

yeah it costs 68 or somethin like that from autozone but thats remanufactured. but i will look you up when i get the cash. so be watchin for the pm. thanks