1995 Ranger air filter
x_skaven_x
04-24-2006, 11:28 PM
Ok guys I found my Air filter and I want to replace it as im suspecting the orginal one from the factory is still in there. So how do i go about removing the housing around it. I unclipped the little clip there but it just seemed to make it loose but not come off. how do i do this. Also what kinda of tranny oil is in the 5sp 4cylder ranger?
12Ounce
04-25-2006, 01:43 PM
I believe I remember some screws on mine ... along with the clips.
As you buy your replacement filter, be sure to notice the thickness of the sponge-rubber perimeter seal. One aftermarket filter I purchased (from Advanced Auto ... can't remember which brand) was too thin ... and allowed leakage bypassing the filter. Luckily I noticed it before really putting it in service.
As you buy your replacement filter, be sure to notice the thickness of the sponge-rubber perimeter seal. One aftermarket filter I purchased (from Advanced Auto ... can't remember which brand) was too thin ... and allowed leakage bypassing the filter. Luckily I noticed it before really putting it in service.
beat88ls
04-29-2006, 01:54 AM
on my 95 it just pulls apart after removing the clip, and the manual 5speed uses automatic trans fluid...
Automotive Network, Inc., Copyright ©2025
