Im new and need help

I have a 94 grand am gt and i need someones input on how to do it. Any info will help.Thanx

Boy do i feel dumb. But anyways im trying to do a clutch on my 94 gt and i was woundering if anyone knows the easiest way to do it. Thanks

Easiest way: Pay someone. Seriously, its a tough job, took me 11 hours with a friend helping. Drivers front corner basically comes out, strut, frame rail, all that good stuff. Access to the transmission is tight as the quad motors are stuffed in there. The transmission isn't all that heavy, maybe 150 lbs at the most. Technically, its pretty easy, just don't forget to unplug the speed sensor and anything else thats attached to the transmission. Good luck.

Yeah i have he quad 4 HO motor. All i have to do is take it out from undernieth the car? and thank for your input very aprecated.

Make sure you have all the tools you will need to do the job before you start it. You will need an engine support, when you drop the torque strut the motor and trans will drop toward the driver's side, this can damage the crank pulley, timing cover, and motor mount on the passenger side. Don't use a jack on the oil pan, its aluminum and will break easily.

Ive got everything i need to do the job. Its getting out thee and doing it is the problem lol.