corona rertorals...
Jimbo_Jones
07-16-2002, 11:42 PM
hey pplz,
Being an owner of an '83 cs corona it has lately come to my attention that they seem to be a hot item on the restoral scene at the moment... throughout qeueensland i've yet NOT to see one in mint condition when i travel in my own 2L(bored) beast:D ... i'm just wondering is anyone other than myself willing to show off their peice of 'toyota history'
plz post any pictures you have (of any late model corona)... they would be much appreciated, once i get my digital camera i'll give you a look at my 'sweet ride' (you could call it that:p )
Being an owner of an '83 cs corona it has lately come to my attention that they seem to be a hot item on the restoral scene at the moment... throughout qeueensland i've yet NOT to see one in mint condition when i travel in my own 2L(bored) beast:D ... i'm just wondering is anyone other than myself willing to show off their peice of 'toyota history'
plz post any pictures you have (of any late model corona)... they would be much appreciated, once i get my digital camera i'll give you a look at my 'sweet ride' (you could call it that:p )
frenzal
07-17-2002, 10:34 PM
hey dude
i live in nsw, and i have never seen a corona done up or in mint condition. i would love to see one. i would also love to have the money to do the same to mine. i will post some pictures of my 86 corona when i get hold of a digital camera. im looking forward to seeing pictures of your beast. by the way how much did it cost to bore your corona, and do you have any specs of your car or any other coronas.
thanks
frenzal
i live in nsw, and i have never seen a corona done up or in mint condition. i would love to see one. i would also love to have the money to do the same to mine. i will post some pictures of my 86 corona when i get hold of a digital camera. im looking forward to seeing pictures of your beast. by the way how much did it cost to bore your corona, and do you have any specs of your car or any other coronas.
thanks
frenzal
Jimbo_Jones
07-18-2002, 10:08 PM
hey... good to meet a fellow corona owner
about the car specs for the corona i havent been able to find even pictures on the internet, as for the car specs the only thing i know is they came out originally with about 50-60 kilwatts (being a later model your might have more)... with the bore job it gained about 10-15 kilwatts... as for the cost i really i'm pretty sure it wasnt more than $250 (mine was done when the engine was out of the car coz it was getting reconditioned)
i'm looking to get some extractors and maybe a small turbo in the near future, also a new paint job, maybe some gauges for the dash...
at the monent its pretty standard, here are my specs
'83 toyota corona
-shift kit
-original 1.8L (starfire) bored (2L)
-reco'd engine
-pre-heat valve train components
not much but its on its way... i nicknamed it the beast... well my mates did:p
about the car specs for the corona i havent been able to find even pictures on the internet, as for the car specs the only thing i know is they came out originally with about 50-60 kilwatts (being a later model your might have more)... with the bore job it gained about 10-15 kilwatts... as for the cost i really i'm pretty sure it wasnt more than $250 (mine was done when the engine was out of the car coz it was getting reconditioned)
i'm looking to get some extractors and maybe a small turbo in the near future, also a new paint job, maybe some gauges for the dash...
at the monent its pretty standard, here are my specs
'83 toyota corona
-shift kit
-original 1.8L (starfire) bored (2L)
-reco'd engine
-pre-heat valve train components
not much but its on its way... i nicknamed it the beast... well my mates did:p
frenzal
08-28-2002, 05:21 AM
hey dude,
i was chattin to a guy i work with the other day, n he told me about his mate that does engine conversions. he's gonna find out if a 1jz motor out of a twin turbo soarer will fit in my corona. i looked it up on the net and it sed that it would be possible. the price i'll have to pay will be around 5000-6000, but when fished it will run 13-14 seconds quarter mile. the specs on my corona that i hav found are, that the motor is 87 kilowatt.
my email is [email protected]
if you want to contact me you can.
i'll let you know how it goes.
frenzal
i was chattin to a guy i work with the other day, n he told me about his mate that does engine conversions. he's gonna find out if a 1jz motor out of a twin turbo soarer will fit in my corona. i looked it up on the net and it sed that it would be possible. the price i'll have to pay will be around 5000-6000, but when fished it will run 13-14 seconds quarter mile. the specs on my corona that i hav found are, that the motor is 87 kilowatt.
my email is [email protected]
if you want to contact me you can.
i'll let you know how it goes.
frenzal
mtcookson
01-06-2004, 10:12 PM
digging an old post out of its grave :rofl:
here is my 1971 Corona MK II
http://www.nissanx.net/gall/alb/album56/DSCF0526.sized.jpg
here is my 1971 Corona MK II
http://www.nissanx.net/gall/alb/album56/DSCF0526.sized.jpg
rona88
07-22-2004, 02:33 AM
hey dude's hows it hangen i also have a 86 cs corona it is a five speed manual and they arn't to bad of the mark when they are running right do any of use no what heads and cams would bolt on it??
i heard that the 1982-1984 RA60 ceica is supposed to bolt on. do use no what engine the celicas have in???
use can email me at [email protected] any help would be appreciated!!
i also got a sheet of corona specs here
Make TOYOTA Family CORONA Model Variant CS Car Series
Year 1986
Doors and Body Style 4D SEDAN
Engine Size 2S-C 2.0litres (1995 cc)
Fuel System CARB
Cylinders 4
Driven Wheels RWD
Std Transmission 3A Optional Transmission 5M, 4M, ,
opt Standard Features Radio Cassette with 2 Speakers
Optional Features Dealer Options No Cost Options
Bore and Stroke 84x90mm
Power 73KW
Torque 157Nm
Weight to Power Ratio 14.73 : 1kg/kW
Front Brakes DC Rear Brakes DR
Wheel Dimension 5Jx14
Turning Circle 10m
Compression Ratio 8.7
Final Ratio 4.111
Tank Capacity 61litres
Exterior Length 4495mm
Exterior Width 1660mm
Exterior Height 1385mm
Front Track 1375mm
Rear Track 1350mm
Wheel Base 2500mm
Front Suspension Ind; macpherson struts with i-arms angled locating
Rear Suspension LX; lower longitudinal arms upper locating rods pa
Kerb Weight 1075kg
Ground Clearance 160mm
Seating Capacity 5
Highway Fuel Consumption 8.5 (lt/100km)
City Fuel Consumption 11 (lt/100km)
Towing Capacity 750kg
Release Date 01/08/1983
Discontinued Date 01/04/1987
New Price (standard) 12875
Average Kms 0
Model Run Nov:Grey mesh grille
VIN Location
Country of Origin
i heard that the 1982-1984 RA60 ceica is supposed to bolt on. do use no what engine the celicas have in???
use can email me at [email protected] any help would be appreciated!!
i also got a sheet of corona specs here
Make TOYOTA Family CORONA Model Variant CS Car Series
Year 1986
Doors and Body Style 4D SEDAN
Engine Size 2S-C 2.0litres (1995 cc)
Fuel System CARB
Cylinders 4
Driven Wheels RWD
Std Transmission 3A Optional Transmission 5M, 4M, ,
opt Standard Features Radio Cassette with 2 Speakers
Optional Features Dealer Options No Cost Options
Bore and Stroke 84x90mm
Power 73KW
Torque 157Nm
Weight to Power Ratio 14.73 : 1kg/kW
Front Brakes DC Rear Brakes DR
Wheel Dimension 5Jx14
Turning Circle 10m
Compression Ratio 8.7
Final Ratio 4.111
Tank Capacity 61litres
Exterior Length 4495mm
Exterior Width 1660mm
Exterior Height 1385mm
Front Track 1375mm
Rear Track 1350mm
Wheel Base 2500mm
Front Suspension Ind; macpherson struts with i-arms angled locating
Rear Suspension LX; lower longitudinal arms upper locating rods pa
Kerb Weight 1075kg
Ground Clearance 160mm
Seating Capacity 5
Highway Fuel Consumption 8.5 (lt/100km)
City Fuel Consumption 11 (lt/100km)
Towing Capacity 750kg
Release Date 01/08/1983
Discontinued Date 01/04/1987
New Price (standard) 12875
Average Kms 0
Model Run Nov:Grey mesh grille
VIN Location
Country of Origin
Automotive Network, Inc., Copyright ©2026
