turn signals help!!!
honzilla
04-22-2006, 09:24 AM
the turn signals dont work
the switch ticks but the lights dont light up on the panel
the hazzards work
Ive checked the light bulds and the fuses
and changed the flasher
what else could it be????
the switch ticks but the lights dont light up on the panel
the hazzards work
Ive checked the light bulds and the fuses
and changed the flasher
what else could it be????
zanegrey
04-22-2006, 04:04 PM
the switch itself..
marc780
06-02-2006, 12:06 AM
Turn signal unit in the column?
zanegrey
08-08-2006, 10:08 AM
yes...
alblogg
10-02-2006, 12:55 PM
the turn signals dont work
the switch ticks but the lights dont light up on the panel
the hazzards work
Ive checked the light bulds and the fuses
and changed the flasher
what else could it be????
I know I am late posting to this thread but I was just browsing and seen your problem. You can replace the whole multifunction switch but it is a little pricey about $85-95 here in NC. What I did was I removed the steering wheel and all the other stuff so you can get to the contacts and the works of the turn signals. Get some contact cleaner and a scotch brite pad and a small pick and clean all the old contact grease out working the leaver. Test them and see if this cured your problem if it did put some new dielectric grease on the contacts and reassemble. If it don't you will need to get the new switch.
the switch ticks but the lights dont light up on the panel
the hazzards work
Ive checked the light bulds and the fuses
and changed the flasher
what else could it be????
I know I am late posting to this thread but I was just browsing and seen your problem. You can replace the whole multifunction switch but it is a little pricey about $85-95 here in NC. What I did was I removed the steering wheel and all the other stuff so you can get to the contacts and the works of the turn signals. Get some contact cleaner and a scotch brite pad and a small pick and clean all the old contact grease out working the leaver. Test them and see if this cured your problem if it did put some new dielectric grease on the contacts and reassemble. If it don't you will need to get the new switch.
Automotive Network, Inc., Copyright ©2026