car wont start

i installed my sr20 last summer, it ran perfectly fine untill now. i noticed on the crank angle sensor the wires were broken right at the plug. it would start if u wiggled them around. so yesterday i got a new cas plug off a ka24de put in on and if fired right up. it started about 5 straight times then allk of a sudden on my way to work it wouldnt fire. i can spell gas really bad. any questions anybody. im stumped.:banghead:

a hose might have come loose. check all around when you have someone cranking the car

maybe its the cas itself?

so i figured out what the problem is. i went to change my spark plugs and there is oil getting in there making it flood with oil not making it spark. only thing i can think of is the valve cover isnt on properly or the gasket is shot. thanks for the help.:screwy: