sub question-again

im not yet done with my box but I have done some math and have figured im going to have between .84 and .72 cubic feet of space and about 5.6 in of mounting depth (maybe a little more) I was looking at the fosgate website and found something I know Im going to like...http://www.rockfordfosgate.com/products/product_details.asp?cat_id=4&item_id=91821&locale=en_US



and I have this amp.... now http://cgi.ebay.com/ebaymotors/KENWOOD-KAC-929-1000W-POWER-AMPLIFIER_W0QQcmdZViewItemQQcategoryZ38638QQitemZ8 057674742QQrdZ1QQsspagenameZWDVW



now the subs are 2ohm each (If I get them im getting 2) can I use them with this amp with no problem???? any information would be greatly appreciated:grinyes: thanx

im not yet done with my box but I have done some math and have figured im going to have between .84 and .72 cubic feet of space and about 5.6 in of mounting depth (maybe a little more) I was looking at the fosgate website and found something I know Im going to like...http://www.rockfordfosgate.com/products/product_details.asp?cat_id=4&item_id=91821&locale=en_US



and I have this amp.... now http://cgi.ebay.com/ebaymotors/KENWOOD-KAC-929-1000W-POWER-AMPLIFIER_W0QQcmdZViewItemQQcategoryZ38638QQitemZ8 057674742QQrdZ1QQsspagenameZWDVW



now the subs are 2ohm each (If I get them im getting 2) can I use them with this amp with no problem???? any information would be greatly appreciated:grinyes: thanx


as long as that is a 2 channel amp and the subs are dvc's you should be fine. u can run them 2 different ways. can run series parrallel which is 4 ohms bridged on amp. or run each sub parallel and run in stereo mode on amp 2 ohms each channel.

thanx

you know I find it strange that stage 3's have a lower mounting depth then stage 2's why is that???

the magnet may be bigger round instead of deaper. there is some kind of magnet they are using which is so much smaller but just as strong as a regular one. there is a company that makes a 15 with a tiny magnet but it is incredibly powerful and loud.

Those P3's look like awesome little subs, too bad a friend of mine talked me into the RE SE's...mated up to a SX1250.1

I've always been, and prolly always will be a fan of kicker's Punch series subs. I've had my Punch Z's for over 2 years, they were a year old when I bought them. They are in a .5 cubic foot box(each) under my seat and I've pushed just over 400 watts rms to them the whole time...

kicker punch????? once im done with the boxes I plan on getting those I have always like the fosgate brand and hope to get em soon

kicker punch?????

Haha, yeah sorry, I get that SX1250 stuck in my head sometimes, my bad. The part that I hate about Rockford's is that I think the P1's and P2's look cooler than the P3's, my opinion I guess. I don't know what anyone else's take is on Punch series. Since you did mention Kicker though, they seem to have some pretty good subs out now too, although I think that prices are starting to seem ridiculous for them. Isn't the 12" P3 retailed at like, 300 bucks or something, make it 225ish and I think it'd be better.

Haha, yeah sorry, I get that SX1250 stuck in my head sometimes, my bad. The part that I hate about Rockford's is that I think the P1's and P2's look cooler than the P3's, my opinion I guess. I don't know what anyone else's take is on Punch series. Since you did mention Kicker though, they seem to have some pretty good subs out now too, although I think that prices are starting to seem ridiculous for them. Isn't the 12" P3 retailed at like, 300 bucks or something, make it 225ish and I think it'd be better.

yea there high up there but not as much as the audiobahn or jl subs those are some "serious cash required" subs i think if i look hard i can get some p3's for under 220