b16a bucking

Ok got a 89 si hatch with a b16a swap car stalls when i come to a stop all the time an the other day she back fired.Also she bucks while im driving sometimes an i need to push the clutch in an push the gas any suggs?Im thinkin either a couple things dizzy is shot not enough fuel or my timing is off

Ok got a 89 si hatch with a b16a swap car stalls when i come to a stop all the time an the other day she back fired.Also she bucks while im driving sometimes an i need to push the clutch in an push the gas any suggs?Im thinkin either a couple things dizzy is shot not enough fuel or my timing is off

you're probably thinking right. No check engine lights? Check your cam timing...set the block to TDC, then look at where the cam gears are.

im not saying you cant drive or anything...but are you starting off from a stop and it bucks or are you driving with the clutch out (say 20+mph in gear) and all the sudden it kinda cuts out spits and bucks?
my car did that not too long ago...
it was the ignitor.

Its not uncommon for the two O2 sensors to get switched when doing the swap either. I would think it's probably that. It happens to a LOT of people.