Bit of an update...

For those of you who are familair with my car project, here's a small update with pix.

First off, the engine, a '77 350 2-bolt main bored .030 over and machined for performance and durability, is assembled mostly and is in the car along with the rebuilt and kitted 700r4. This past saturday I had to pull the heads and run a thread chaser thru the spark plug holes because I put the wrong plugs in. Turns out plugs with a tapered seat will mushroom the threads of aluminum heads, so don't make the same mistake I did. The other dilemma was the fact that my intake manifold is for the newer head bolt pattern where the center 2 are angled differently, and my heads are the older style where they're all angled the same. So, my father, who's a machinist by trade made a set of angled washers that will guide the bolts in at a different angle and so the can also seat fully. This past week I had a bit of a shopping spree at summit and got the rest of the parts I need. Startup day should be coming very soon.

here's the eye candy.

chrome dipstick
http://home.comcast.net/~genopsyde91/dipstick.jpg

cap, rotor, coil, dist. gear
http://home.comcast.net/~genopsyde91/ignition.jpg

1.6 roller rockers w/ rods
http://home.comcast.net/~genopsyde91/rockers_rods.jpg

Air cleaner w/ matching valve covers
http://home.comcast.net/~genopsyde91/valve_cover.jpg

Holley 670cfm TBI
http://home.comcast.net/~genopsyde91/TBI1.jpg
http://home.comcast.net/~genopsyde91/TBI2.jpg

Nice.. I love the matching air cleaner and valve covers..

Lookin good, Now get that thing runnin

dang, i like it, i like it alot

Looks sweet, I can hardly wait to see that thing running, be sure to have a camera ready :). Who are you working with to get the chip done, or are you going to do it?

I've already been in contacts with tbichips.com for a custom job.

git 'er done!!!

looks good. i hope you're not talking about vortec bolt style compared to the standard bolt style. even if you get the bolts to angle correctly the ports don't exaclty match up. or is there a new standard style that i don't know about?

also, what heads do you have?

what else did you buy on your shopping spree?

also, is this going in your camaro?

No, not the vortec pattern, I mean the difference between 86 and down heads compared to 87+. The heads are Brodix IK200's, aluminum with 200cc intake runners. The pictured items are all I got last week, now I just need to put it all on the engine, and yes, this is for the camaro.

nothing i didnt already know, come geno hurry up a GITRDUN!

I'm really digging that carburetor(how many cfm) and those rockers

I used to have accel parts on my camaro, they had to be replaced and I just used duralast, what are the advantages with accel?

it's a TBI (throttle body injection), not a carb, it's 670cfm. the 305 RS came with TBI from the factory, a rochester unit that i think only flowed 3-400cfm.

I don't know what advantage accel has other than I wanted all my ignition parts to be the same brand and they were the only ones I could find every component in.

eeuuhhhhh, eheh, I meant the air cleaner...and I don't know what it is or where it goes, *thinks* OHHHHHH so that air cleaner goes on top of the tbi? but it's not a carburetor system, which also have air cleaners, am I right?

you are correct, visually TBI and Carb are similar.

Very sweet Geno and take your time. Summer isn't even here yet. Better to get her right the first time than having to rip into her and scratch up the beautiful accessorys you got.

Good job Geno its looking good. Cant wait to see u rippin up the streets.

Nice parts, but where are you going to be installing the "Hanging File Folders"? :rofl:

lookin damn good man, what are the specs on that xfi cam? i may have to up the game just keep up w/ u lol

Nice parts, but where are you going to be installing the "Hanging File Folders"? :rofl:

If it were me, in the center console to keep all my tickets organized :D

Thanks for the tech tip on the plugs Geno, that's a REAL easy one to overlook, plus with aluminum, you wouldln't truely feel problem installing them. :thumbsup:

i think this is the first time geno has ever posted pictures of his car or anyhting to do with his car on af

na he's posted up pics before, i've seen them...

Nice Geno

its fun getting parts in the mail....id buy stuff just to get stuff....its like christmas!