how much?
3000gtsl
04-14-2006, 09:04 AM
What is the max hp that we can get out of a zx2? And will it be hard to install it?
AltecZX2
06-06-2006, 10:49 PM
same as a focus, its almost identical
zx2guy
06-06-2006, 11:02 PM
i dunno it depends on what you keep and what you toss. if you disable the VCT < if thats what you have i hear you can get substantially higher numbers then if you keep it... granted there is a too much category where you stop having a street car and start having a strip car... so if you specify what you are looking for we might be able to help.
AltecZX2
06-07-2006, 12:29 AM
full boltons, good condition motor and goot SCT tune With VCt will give you about 145hp/142tq at the wheels. thats roughly 175 crank.
zx2guy
06-07-2006, 11:09 PM
there is also that role of thumb on transmissions: manual is about 25% (?) reduction, and auto is about 40%
AltecZX2
06-07-2006, 11:23 PM
manual = 17% for a zx2/focus
zx2guy
06-07-2006, 11:29 PM
sweet, 25 was an average. is there a way to bring that down? i know on auto's you can find more efficient torque converters (ussally smaller) and shift kits help too... but thats more on putting power to the ground.
AltecZX2
06-07-2006, 11:33 PM
15% is the general assumption, its 25-30% est. for auto's
for a manual the onlything you can do is get a lightweight flywheel, and a good strong/lightweight clutch. and that wont help a LOT just a small bit. but a tranny in good shape is always better then a beat one.
for a manual the onlything you can do is get a lightweight flywheel, and a good strong/lightweight clutch. and that wont help a LOT just a small bit. but a tranny in good shape is always better then a beat one.
zx2guy
06-07-2006, 11:52 PM
i know there are single, double, and even triple clutch plates... but i have yet to drive a double plate clutch... would it help? or is it just different?
AltecZX2
06-08-2006, 09:24 PM
i believe the centerforce is dual, if its is, its just heavy lol
Automotive Network, Inc., Copyright ©2026
