brake help

i have a 95 sts and i wanted to change the brake pads on the rear but when i tried to retract the caliper it would not retract on either side is there something special i have to do to push the plunger back into the caliper or do i have bad calipers any help would be great. aaron:banghead:

There is a special tool to turn them back into the caliper, you may have to rent or buy this to do this properly.

dose anyone know where i can find this tool?:wink:

dose anyone know where i can find this tool?:wink:
It's usually referred to a a brake cube and are available at most decent auto parts stores for under $20.

That may not work as inward pressure needs to be applied to the piston as it is turned. The reals toolare are available from napa for instance.