1995 V6 Camaro...

Its all mine!!!!!!
I got it at 11:00 A.M. this morning, drove it 110 all the way back to my hometown.
T-Tops Open, these cars are so sweet.

Please, if you have any peformance part links on the web for V-6's let me know. I checked out RK-Sport, and a couple of others.

Glad I could jopin the few and the proud here at the Camaro Forum.
Look Forward to talking with you guys a lot more.

Her is my car as it sits right now:
Dual Dyno Max exhaust, came on the car when I bought it.
I added the Momo Steering wheel and Shift knob.
Later improvements:
-Flowmaster complete exhaust system
-Hypertech's 160 Degree Thermostat
-ASP's Underdrive pulley System
-Custom Cold Air intake (did not like the SLP intake, and they dont make it for the 3.4L 95)
-BMR Complete Suspension Upgrade:
Anti Squat Brackets
Tubular Font upper/lower A-arms
Adjustable Panhard Rod
Rear tubular Control arms
Front/Rear sway bar Package
-Eibach Pro Kit springs (Not sure what shocks though, Any sugs?)
-Bored/polished throttle body
-Ported and polished intake manifold
-Camaro High Back Spoiler

And the front...

I have been working hard and long, and searching far and wide.
Here is the list of mods completed so far:
3.73 gears in the rearend
BMR 32mm Front, 21mm Rear Swaybar package
BMR Tubular lower control Arms
BMR Tubular adjustable Panhard Rod
BMR Tubular Subframe Conectors
BMR Strut Tower Bar
Hypertechs 160 degree thermostat
ASP Crank underdrive pulley
Still a lot more to come...

New mods....

Pace setter Headers
Dual Flowmaster 4-tip cat-back exhaust
Center Force II Dual Friction clutch
Rebuilt Racing tranny, and lightened flywheel....while I was in there.

oh stop the bragging. I'd put money down to race up against that camaro with my Grand Prix GT with the mods i made to it. :flash:

- SLP Cool Air Induction Kit w/K&N air filters 7-10hp
-Custom Exhaust: No resonator, No U-bend, Performance Mufflers 15hp
-DynoMax Super Converter

-Next Upgrade is probably performance headers.

current estimated hp: 230hp Goal: 250hp even with this kind of hp i got i still think it would take care of your camaro.

By the way.....looks to me you spent TOOOO much money on your v-6 camaro. If i was going to spend that kind of money and time i would have bought a Z-28 camaro with stock 275hp and upgraded from there.

Im sure there are many ppl laughing at what you did with your money.:hehehe: i got a total of $300 max in my car and thats the truth.. im sure you got well over $1000.

RaceGhost-Dude-Sweet!!! don't listen to scott, he just got nailed by a chevette, just kidding.:flipa:

Have you got any Quarter mile times or Dyno stats?

Congrats. My first Camaro was a '95 V6. It was a good car. I too looked into upgrading it. But decided that upgrading a V8 would be better (yet, I want to upgrade a 305, go figure :) ). Anyhow, enjoy your ride, she will take care of you if you take care of her. My first accident was in the '95 'Maro and it did alright. Good luck and kick some ass. :)

I really havn't had time to get any times yet, winter hit, and so, well, working harde for more parts.

My goal for this car is to have it twin turbo'd with a far, but achivable goal of 500 hp or so. I want to be able to pull up to the line against v-8 or even an ss, in my (little) v-6...so you say Scott, and blow its doors off.

Any ways, I just added another great part. I put the BMR Racing Springs on it. Yes I know there designed for the weight of a V-8, but that is why I got them, the cornering power and plant is awsome. Ridablilty is awsome too.

Any ways, Scott is it, I have one word...JEALOUS!

As for everyone else, thanks for the props.

Man, I need to come into some money so that I can keep the list of my mods growing. When you get that TT'd, come find me. Hopefully by then, I'll have my LS6 conversion with an Icon TT setup myself :D ...

Now where did I put all of that money...

I work long and hard for the parts to my car though, just like everyone else. And yes its frustrating to see all of these goodies for the Camaro's adn patience is agonizing. Anyways, I really dont get out much, cause, well, I spend most of my time looking for parts or watching races and etc. It also helps to have a sponsor that helps you get your parts for cost, and cuts you a mad deal on labor. Still gets on the expensive side, but not as much with my sponsors.

And yes I know what your thinking, sponsors...on a V-6... Well im building this car for autocross and road-races. In the town where I live, 50,000 people, tiny I know, Raceing all but up and dissapeared, even the drag strip got closed. The club Im in is trying to get it back open, we go to other towns and race, and well Ive got a few 1st's, a few 2nd's and a few 3rds's, I have yet to finish a race below 3rd place. Oh well, driving fast and racing is what I like to do. So I got the leading drag car mechanic in town to see me race and see what I was made of, and well he sponsor's me. So hey...don't ever give up your dreams.

That's cool. If I had the extra time outside of my major, I'd try and do the same thing, but for now, I'm concentrating on graduating from college. That's my big money pit for now:( ...

Any ways, Scott is it, I have one word...JEALOUS!

No, Just thought it would have been more productive and better if you put your money you spent on the 3.8 into a race car or a V-8. Still nice mods and im sure the thing it fast.

Thanx for the remark, I meant no offense...
Oh, and its a 3.4L...yah I know its small, it is getting fast though.
The insurance on a z28 and ss is huge for me, and the other reason is that I like to try for the impossible, and every body says it can't be done so...a 3.4L v-6, that blows the doors off of a SS is pretty impossible, so I thought it would be worth a try.
Another reason is the weight on a 3.4 is considerably lighter than that of a v-8, and for autocross thats a bonus.

Sounds like a good reason to me now. Good Luck with it. :)

I just got a hook up on a t-56 6 speed tranny. Doing the swap sometime in the next 2 weeks. I also am going to take the driveline from the guy too., so I can replace that shitty 2 piece on that is stock. This way I can install the BMR Trak-pak also. I am also getting the cam , port, polish and bluprinting done, along with a full engine rebuild...400 HP, here I come. Whooohooooo!!!!!!!

Damn.....400hp is alot for that V-6. Go for it!

I am also swapping out the guage cluster to a V-8 150 mph guage cluster. After I get the engine done, I will be programming the computer to take out the speed limiter and adjusting it for more speed, HP, and torque.

Raceghost,

Those are some nice mods your putting on your car. I've got a 3.4l also. How are the mods going by the way? Lemme know how much pony's you've put on.

I've only put on the following:

SLP CAI
Silver reverse glo gauges
Kenwood CD
16" ARE's (Came with the car)

On the way:
Pacesetter Headers (BTW, did u add headers yet?? If you did, how's the horsepower?)

Future Plans:
B+G Springs/Bilstein Shocks

Wishlist: If I somehow come up with $4,000...
Ported Upper/Lower Intake Manifold
Ported Cylinder Heads
Jet Chips Stage II
Comp Cams

Current HP~170; Goal~270
Good Luck on your Mods.

Yes I bought the Pacesetter Headers and have them installed They give lots of low end and Mid. Helps a lot of the line. I am now searching for a cam to put in this thing. I will update my list of mods soon. I have been real busy working two jobs to get my car done for the race season. More to come.

yo ghost sounds like a nice camaro, i have a 97 v6 with rk sport headers, which my dad had to fix the damn leaking since no other mechanic could. I have slp cold air, high flow cat, flowmaster catback, short throw, hyper tech 160 degree thermo, new air temp sensor, and huge 255 by 50 tires. If i could suggest anything one mod for you it would be the large tires, these tires have been the most performance enhancing mod ive made, car just sticks to the road now, very little tire spin on take off. Back to my ?, i was wondering how the 6-speed trans swap went, im looking to do the same with mine, pls hook me up with all you know about it.

herers a few sites for v6 camaro's, Lmperformance.com, 3800performance.com, i know you have 3.4 but im sure others can use that, i have more, just gotta find them, will post them soon.

Bit of a no-no to dig up old threads here.