Wheel bearings on a 96 Maxima SE help.

Hey guys,
I am hearing some wheel bearing noise coming from the pass. front side...
Any imput on how this job goes? Anything to watch out for?
Thanks much for any imput.

Typical installation, needs pressing or grinding tools... My stupidity for repeated front bearing loss [peugeot] was worn caliper guides: sticking brakes warmed, fried the bearings. Lubricate guides, special brake grease for piston, make sure guides slide easily... check http://www.cardomain.com/ride/748507/18

http://memimage.cardomain.net/member_images/4/web/748000-748999/748507_437.jpg

As far as replacing the bearing , you need to take the whole Knuckle assy Off, If you feel you can do that then take it to a shop it have the hub pressed out and the bearing . New bearing pressed in and hub repressed in.

There are 2 pieces that are pressed into the knuckle the hub and the bearing
If the bearing is making alot of noise it is possable you could damage the hub also.

GL