Transmission Swapping
farewarning
03-30-2006, 01:11 PM
Hello. I have a 1986 Fiero 2.5L 2M4 with the 5 speed Izuzu. I was wondering if anybody happened to know if the 2.8L engine will bolt up to the 5 speed Izuzu. I know my old 1986 2M6 had the 2.8L but it had the 4 speed Muncie. I dont want to swap out my transmission just the engine and dont know if it will bolt up or not. Thanks
Mike
86FieroSE 2M4
5 Speed
Mike
86FieroSE 2M4
5 Speed
RandomTask
04-05-2006, 04:39 PM
They will swap but on top of the trans you will need the shift cables and slave cylinder.
P.S. The 2M4 comes with the 5 speed isuzu, not muncie. The muncie IS the getrag. (Designed by Getrag, built by Muncie)
P.S. The 2M4 comes with the 5 speed isuzu, not muncie. The muncie IS the getrag. (Designed by Getrag, built by Muncie)
z24-xavier
04-08-2006, 11:32 PM
actually the 4speed muncie isnt really made by muncie. it's made IN muncie. muncie, new york. (MOST transmissions are named by the town in which theyre made)
RandomTask
04-12-2006, 04:00 PM
Indiana , not new york
farewarning
08-09-2006, 01:49 PM
Thats what I meant I have a 86 2m4 with the izuzu 5 speed and want to swap up to a 2.8 or even 3.1 and would like to keep the Izuzu in there. I dont know if it would mount up. Thanks
Automotive Network, Inc., Copyright ©2025