Pressure Problems
powwow944
03-17-2006, 03:29 PM
last week i had to replace the gasket set on my oil cooler and a couple other leaks that were on my 944. just wanted all the leaks to stop. Well now i got an even bigger leak. I've tried 2 seprate types of oil filters and everytime it seems to blow out my oil filter gasket. if anyone could give me any advise i'd appreciate it.
ledhedsymbols
03-21-2006, 06:55 AM
First:
What type of filter are you using? I recommend the Mahle. The dealer or a good independent Porsche shop should carry it. If not, you can buy them by the lot on sleaze-bay.
Second:
Are you lubricating the gasket with a little bit of motor oil before you install it, and are you tightening ONLY hand tight?
What type of filter are you using? I recommend the Mahle. The dealer or a good independent Porsche shop should carry it. If not, you can buy them by the lot on sleaze-bay.
Second:
Are you lubricating the gasket with a little bit of motor oil before you install it, and are you tightening ONLY hand tight?
zero_porsche
03-23-2006, 03:04 PM
i just replaced my oil cooler gasket over spring break too. when the oil cooler gasket is off the car there is the plug that is a allen wrench, and a spring that is below the plug. did you mess with that because that has to do with the oil pressure.
Automotive Network, Inc., Copyright ©2025
