'02 Door lock key pad

Where do I find the factory code to lock/unlock the doors with the key pad on the door? We just got our Explorer and the dealership didn't have the numbers. I have the instruction manual so I can program the new numbers in - I just need the factory code first. Thanks again for any help!!

Not sure on the 02, but older ones (1996 etc) have the code on the control module behind the left 1/4 panel trim. On my 1996, I just need to remove the access panel for the rear wiper bottle and I can see the module. Hope this helps.

On my 02 Sport trac I found it above the passenger side airbag on a label on the module. Disconnect neg battery lead.....drop down glove box door ( tab on each side of door ) undo 2 bolts and disconnect air bag wire, slide airbag out..look for approx 3"x3" beige module ...5 digit code printed on top of module...

I have a 2003 Explorer and in the owner's guide it says that the code is located on the computer module. Can anyone tell me where the computer module is on a '03 explorer?

Review the Sticky: Keypad Code Location from the top of the list on the Explorer forum page.

-Rod