How to remove antenna base?
zachzchw
03-08-2006, 09:53 AM
I have a 97, and am looking to upgrade the antenna. My old one is snapped off. How do I remove the old base?
zachzchw
03-09-2006, 12:29 AM
Anyone?
BlazinMlew
03-09-2006, 12:32 AM
I am not sure exactly but my guess would be it has to be done from inside the fender well. I am not for sure though never done it.
dmbrisket 51
03-09-2006, 01:11 AM
the whole base or just the old rod?
billibong
03-09-2006, 08:50 AM
If it's just the roc, they screw off and screw back on. If it is the base it is removed by:
pull the mast and remove the capnut on the outside of the fender
unplug the antenna connector
Lift off the upper adapter and gasket
unscrew the assembly and remove from fender
pull the whole assembly up
Installation is reverse of removal.
Hope this helps.
pull the mast and remove the capnut on the outside of the fender
unplug the antenna connector
Lift off the upper adapter and gasket
unscrew the assembly and remove from fender
pull the whole assembly up
Installation is reverse of removal.
Hope this helps.
BlazinMlew
03-09-2006, 11:24 PM
If it's just the roc, they screw off and screw back on. If it is the base it is removed by:
pull the mast and remove the capnut on the outside of the fender
unplug the antenna connector
Lift off the upper adapter and gasket
unscrew the assembly and remove from fender
pull the whole assembly up
Installation is reverse of removal.
Hope this helps.
see it goes to show I dont know a damn thing :lol:
pull the mast and remove the capnut on the outside of the fender
unplug the antenna connector
Lift off the upper adapter and gasket
unscrew the assembly and remove from fender
pull the whole assembly up
Installation is reverse of removal.
Hope this helps.
see it goes to show I dont know a damn thing :lol:
Automotive Network, Inc., Copyright ©2025