94 Buick wont start
gore349
03-05-2006, 04:46 AM
Someone Please help me.
My 94 buick lesabre 3.8 wont start, I have replaced plugs, wires, cam sensr, crank sensr, egr, im getting no codes, i waited a day it started and i drove it shut it OFF 3 times, WAITED 4 HOURS BAMMMM wont start again, I WANT TO SET IT ON FIRE !!
I DONT KNOW WHAT ELSE TO DO. WHEN I WAITED AN HOUR AND IT TRYS TO START FOR A SECOND AND I THINK SOMETHING ELECTRICAL WONT LET IT, FUEL FILTER IS ONE YR OLD THE CAR HAS 115,OOO MILES.
SOMEONE TOLD TO BANK THE GAS TANK WHILE SPINNING THE MOTOR TO SEE IF ITS THE ASSEMBLY......................ANY ONE HAVE THE ANSWER
My 94 buick lesabre 3.8 wont start, I have replaced plugs, wires, cam sensr, crank sensr, egr, im getting no codes, i waited a day it started and i drove it shut it OFF 3 times, WAITED 4 HOURS BAMMMM wont start again, I WANT TO SET IT ON FIRE !!
I DONT KNOW WHAT ELSE TO DO. WHEN I WAITED AN HOUR AND IT TRYS TO START FOR A SECOND AND I THINK SOMETHING ELECTRICAL WONT LET IT, FUEL FILTER IS ONE YR OLD THE CAR HAS 115,OOO MILES.
SOMEONE TOLD TO BANK THE GAS TANK WHILE SPINNING THE MOTOR TO SEE IF ITS THE ASSEMBLY......................ANY ONE HAVE THE ANSWER
HotZ28
03-05-2006, 08:04 AM
Take your ICM and coil pack to Auto Zone for testing. Have you checked fuel pressure and injector pluse while it is not starting?
yogi_123rd
03-06-2006, 04:56 PM
When it doesn't start, do your power windows work?
I have a bad ignition switch in my 94 PA. When it doesn't start, most of my accessories won't work either. Low voltage in the ignition circuit. I then work the roll down switch until I can roll down the windows. When the windows go down, the car starts.
I have a bad ignition switch in my 94 PA. When it doesn't start, most of my accessories won't work either. Low voltage in the ignition circuit. I then work the roll down switch until I can roll down the windows. When the windows go down, the car starts.
Automotive Network, Inc., Copyright ©2026