1990 Brougham
WPAGEJR
03-04-2006, 08:51 AM
I Recently Purchased A 90 Brougham Elegance. The Car Ran Fine Except A Little Hesitation. I Did A Full Tune-up. New Plugs, Wires, Cap, Etc. Problem Now, The Car Runs Like Shit. It Sputters And Stalls As Soon As It Is Put Into Drive. I Have Checked All My Connections And Checked The Plugs Wires. Still Nothing. Anyone Else Have A Similar Problem Like This?
michelq
03-04-2006, 10:33 AM
is check eng light on when it is runing
WPAGEJR
03-04-2006, 10:36 AM
No Thats The Funny Thing. When It Stalls Out The Engine Light Blinks But Goes Out. As If You Were Starting The Car.
michelq
03-04-2006, 10:41 AM
listen.find a jumper wire or jumper cable and ground the alternator direct from the battary and then see what happen then let me know
WPAGEJR
03-04-2006, 10:52 AM
Can You Describe How I Would Do What You Said. Im Assumung Take The Ground Lead From The Battery And Place It On The Alternator?
WPAGEJR
03-04-2006, 11:05 AM
I Forgot To Say That I Didnt Change The O2 Sensor Yet. I Have It At My House. Thats The Next Thing. I Was Reading Other Posts And I Am Swaying Toward Some Sort Of Ignition Problem.
michelq
03-04-2006, 11:12 AM
Can You Describe How I Would Do What You Said. Im Assumung Take The Ground Lead From The Battery And Place It On The Alternator? just add ground to alternator direct from battary got it
WPAGEJR
03-04-2006, 11:32 AM
Okay, I Will Try That When I Get Home. Thanks For The Info. Im Also Gonna Change My O2 Sensor While Im At It.
WPAGEJR
03-06-2006, 04:34 PM
Turned Out To A Loose Plug Wire. It Still Hesitates So Im Thinking New Ignition Coil And Pack. Any Advice?
Automotive Network, Inc., Copyright ©2025