Help with header for ZC

Hey the ZC is still classified as a D series motor right ???

if so then will the header from a D series motor bolt onto the ZC.....I have a ZC and I was wondering if the header from my D16A6 would bolt onto it ???? Thanks for the help guys

-Brad

it should.....but you will have to do a little grinding to clear a little tap that sticks off the ZC head. and also port the top of the header cause the holes are off my a few MM.

hey I just remembered you have the STD model Civic....do you still have the factory header off of your old motor.....and if you do.....do you have a picture.....and if so How much do you want for it.

yeah i still have the old STD header.....but not the ZC one (just sold it last week) if you want the STD one, how bout $50 shipped

yeah...any d series header works...I had a d16z6 header on mine...

well is there any way you can get a picture of it for me....I just have to verify the way it is designed......a friend of mine is a tech guy at the Honda dealership and we were working some crazy ideas out for my car....and one of those involves a STD factory header.

it will bolt up.

Just port/trim it

I know it will bolt up....but I need to know if it is like my SI header which is a 4-2-1 or is it a 4-into-1.....I need a 4-into-1 header....thats why I wanted to see a picture.

heres a photo. . The dc 4-2-1 header is from any 88-91 crx/civic, You can use any header from a 88-91 crx/civic.
The stock manifold is from a zc.
http://mediaservice.photoisland.com/auction/Jul/2002723194524013510453.jpg
http://mediaservice.photoisland.com/auction/Jul/2002722212446779660532.jpg