Exhaust Fitment

I have 95 Jimmy 2 door (vin w) and is in desperate need of a replacement exhaust. I wanted a little more performance so i figured i go out and get an after market muffler and use the oe tailpipe and figure out a way to get the flange to bolt up later. I also looked at cat-back systems but i can't seem to find any for the 95 2 door. I went to walker exhaust and the part numbers they gave me say that the 95-99 muffler and tailpipe were all the same part number. My question is that will a catback for a 96-99 also fit since it seems that the exhaust did not change between 95 and 96?

For the exhaust I want since I'm lazy:

http://www.gibsonperformance.com/products.asp?pid=14297&make=26&model=529#529

I tried to link the walker but it wont load my page so

http://www.walkerexhaust.com

will get you there

Any ideas, i called emailed tech support and got this


"I am sure there is a difference, but am not sure exactly what it is. I am
assuming that the flange in front of the muffler may be different and that
is where you may run into a problem. I have attached a photo of the kit so
hopefully this can help you"

Bump again...

Does anyone know if there is a difference in the exhaust flange from the cat to the muffler between 95 and 96. I know someone here has a whole bunch of blazers, could you take a look for me (and either pm or im me if you can give a lot of help)

thanks

One more try...

Any answers