Our Community is over 1 Million Strong. Join Us.

Carnivore Diet for Dogs

AIR DRIED BEEF DOG FOOD

Motor Mounts


xavier3jr
02-27-2006, 02:35 AM
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8037796099&sspagename=STRK%3AMEWN%3AIT

I've got this really annoying nock when i shift gears, and when i floor it. And i know it my motor bounceing so i decided to order them. But on some pictures i have saw there is 4 mounts i only know of 3. One on the motor, one on the tranny, and one that mounts to the thing that runs under the car and bolts to the frame. Where might the other one be?

ez1286
02-27-2006, 04:00 AM
The other one is in back of the motor it's actually bolted to the trans (i just took this one off) is that kit for all four mounts? It's not very specific, and is it turbo or n/a cause i know the mounts are different.

SilvrEclipse
02-27-2006, 04:27 PM
The motor mounts might be different but the inserts are the same. Good luck putting them in.

blk_srt
02-27-2006, 04:32 PM
Thats pretty cheap isnt it? I might have to order some to

ez1286
02-27-2006, 05:02 PM
The motor mounts might be different but the inserts are the same. Good luck putting them in.
The turbo and n/a motor mounts are the same? I didn't think so considering the engines are backwards and nothing else is the same...

blk_srt
02-27-2006, 05:03 PM
the mounts are different but the inserts could be the same

xavier3jr
02-27-2006, 07:11 PM
the mounts are diffrent but im pritty sure the inserts are the same. anyone never put them in? how hard are they lol. might wana get some anal lub for this job :lol:

blk_srt
02-27-2006, 07:13 PM
umm...I think some grease might work better than "anal lube" but you probably have more of that lying around:rofl:

xavier3jr
02-27-2006, 07:22 PM
hardy har har :flipa:

george536
02-27-2006, 08:17 PM
mine were pretty easy, to do, but you will need to lube the insert pretty good for the big mounts.

kjewer1
02-27-2006, 11:12 PM
At 37 bucks I have to assume that is the partial kit with just the front and rear, which simply slide into the stock rubber mounts to fill the gaps. If it's the full kit somehow, the two side mounts are a bit more work. Some poeple get fancy with the torch and hacksaw tag team, but I prefer to pay my machinist 10 bucks to press the old metal sleeved rubber inserts out. The new ones go in easily with a vice, just don't bother tryign to put the metal spacer/sleeve in until both halves of the uerethane are in.

xavier3jr
02-28-2006, 07:18 PM
I'm pretty sure its the full kit energy suspension has some very good deals. i got my shifter bushings for only 12 bucks. but we'll see when it gets here.

Add your comment to this topic!