how about these?

I am looking for some good drag radials for my camaro. I was some that will be good at the track. I was looking at these, what do you think good? http://cgi.ebay.com/ebaymotors/Mickey-Thompson-235-60R15-ET-Street-Drag-Radial-3752R_W0QQcmdZViewItemQQcategoryZ66473QQitemZ80247 65664QQrdZ1QQsspagenameZWDVW

Those are only 235's... shoot my front tires are wider than that. I'd look for something a little wider. Granted they are drag radials and can get good traction, I'd still try to find something that's a little wider, unless you're pretty sure that they'll hold up fine with however much power you're pushin.

ya, i know what you mean, i was not going to get that size i was just talkin about that tire. I will be putting two of them on 94 camaro rims and putting thoes 94 camaro rims on my 92 camaro for the track. How wide of tire should i get for the 94 rims? they are 16" stock rims. i will be mounting them on my car with wheel spacers for the track.

ya, i know what you mean, i was not going to get that size i was just talkin about that tire. I will be putting two of them on 94 camaro rims and putting thoes 94 camaro rims on my 92 camaro for the track. How wide of tire should i get for the 94 rims? they are 16" stock rims. i will be mounting them on my car with wheel spacers for the track.

Well I know my old 16" stock rims had 245's. But I believe you can get up to 255's to fit on them. But since you're going with drag radials, then 245's should be able to suit your needs just fine.

ok cool, thanx alot. And is it safe to drag on wheel spacers?

not really. the best thing to do would be to swap your stock rear with one out of a 93+ z28. then you would get posi and your rims would fit on the back with no problems

it was just a idea because my dad said he was going to give me the rims, so i thought i would do that. I might use the rims he gave me for every day use, and use my stock rims for the track with drag radials.