Boosting my car

Here is my manifold that was made for a me. DOHC ZC. It would work with a single cam also. Wastegate not on yet.

http://www.telusplanet.net/public/legend88/Roberto/1.jpg

http://www.telusplanet.net/public/legend88/Roberto/2.jpg

http://www.telusplanet.net/public/legend88/Roberto/3.jpg

http://www.telusplanet.net/public/legend88/Roberto/4.jpg

http://www.telusplanet.net/public/legend88/Roberto/5.jpg

http://www.telusplanet.net/public/legend88/Roberto/6.jpg

http://www.telusplanet.net/public/legend88/Roberto/7.jpg

sweet!

is it done? Shouldnt there be more welds? Looks cool though.

It is not don't it will be finished up this week and ceramic coated.

I end up using Innovative Cross member with a eg rad.

I will have a Turbo Smart waste gate and Greddy type RS BOV.

I will have more pictures as them come.

hey lookin goodwhat are you planing on setting the bost at. i have astock zc with plans for a costom setup. its gonna be a t25 and i need to know what i should be thinking for boost cuz i dont know that much about it. thanks

When bossting a car you should really think about the PSI more of what you want to make in terms of WHP. 10 PSI out of a CT25 is way different then out of a T3/T4.

I would reccomend replacing the head gasket, head studs, water pump and timing belt.

looks good but i dont really like the angle of the collector but who am i to talk i am making myself a log

Here is a picture of the mani all weld up

http://www.telusplanet.net/public/legend88/Roberto/8.JPG

Beautius! I wish I could boost my car...

You can do anything if you put your mind to it :P

My mind yes, my wallet..not so much...

Who need equil length runners anyway.

Mani all done

http://www.telusplanet.net/public/legend88/Roberto/9.jpg

you're wastegate is going to be awfuly close to the rad support.

but very cool. i wish i could weld like that.

Those are some nice thick plates man, gonna be a beast!

I must ask.

Why did you take the time to fab that thing up? Now that I acutally took the time to look at it, a log manifold might make more power.

I see how your design is the equal length style, but acutally looking at the runners, 1 and 4 are much longer. I think you'd make more power with a ported hf mani.

still awesome work none the less.

I am not sure. I was told this was better cause it has a proper collector with mider joints. Only the dyno runs will tell. Should be this weekend i hope.

Here are the pics of it being installed. I know the car is dirty. Shut up!

http://www.calgarysfinest.net/Turbo/Install.jpg
http://www.calgarysfinest.net/Turbo/Install1.jpg
http://www.calgarysfinest.net/Turbo/Install2.jpg
http://www.calgarysfinest.net/Turbo/Install3.jpg
http://www.calgarysfinest.net/Turbo/Install4.jpg
http://www.calgarysfinest.net/Turbo/Install5.jpg
http://www.calgarysfinest.net/Turbo/Install6.jpg
http://www.calgarysfinest.net/Turbo/Install7.jpg
http://www.calgarysfinest.net/Turbo/Install8.jpg

Damn dude, I love those welds...really, but Jeebus CRUST that car is dirty! Like how you routed it down below too.
But seriously, I couldn't work on a car that grody...say it with me, simple green!

nice...

but that carr isn't dirty..it's filthy :lol: get some #'s...what are you shooting for...

I know it is sick drity. LOL. I am hoping to hit 220-40 running 10-11 PSI. I should have it tuned this weekend i hope.

I made 189.3WHP@6PSI

.....is that all?...turn that damn thing up to like 10 psi man, that b18 has low compression...

I am happy with that number. It is crazy going from NA to boosted. Also it is a ZC not a bseries. I will be uping the boost in a few weeks to 10. I am hoping to hit 220WHP

nice setup man, enjoy boost :D

I am. I got ocky and tried racing a Viper and got worked

Haha! Whoops, just took a quick glance at the engine...mistook it for a b18a/b...I am planning on boosting mine this summer, one of a couple options..either a nice paint job, a new car (crx) to swap all of my stuff into, or boost.

nice

Thanks for the comments. I have been having fun with that is for sure. Can't wait till the track gets reopened