1999 key less remote

hi i need to know how to program a new keyless remote for my 1999 z24 cavalier thank for any help kimber

All Remote Keyless Entry Modules may be programmed to receive four different
transmitters which all may be used to operate the remote control lock system on the
vehicle.

Also, severalvehicles, each with the same system may all be programmed to operate from the same transmitter or four different transmitters.

Step 1. Turn ignition off

Step 2. Ground the program pin.(within one second, Lock, Unlock and Trunk will cycle to indicate module ready for programming.)**the program pin is the two wire connector plugged into the RKE reciever in the trunk of the vehicle at the Left Wheelhouse. Leave the main harness plugged in but unhook the two wire connector and ground the pins.**

Step 3. Press and hold the LOCK and UNLOCK buttons until:
Lock, Unlock, Trunk, and Horn cycles to indicate the transmitter has successfully been programmed.
(This takes no more then 12 seconds)
Step 4. Repeat step 3 for the remaining number of transmitters
Step 5. Remove the ground from the program pin.
Step 6. Verify proper operation of the transmitters.

will this work with a 2002 z24?

will this work with a 2002 z24? iam not sure try it what do you have to lose kimber

iam not sure try it what do you have to lose kimber
I would hate to blow the reciever by grounding something that shouldn't be.

I would hate to blow the reciever by grounding something that shouldn't be. yes i would not like that my self may be some one out there knows kimber

It will NOT work on a 2002...those require dealer programming.

It will NOT work on a 2002...those require dealer programming. chris thank for info