axle help please

i got a project talon as you can say and the axles were already out and all that now i tore the tranny out and replaced the clutch and now i need to get the axles back in but i cant break the tie rods loose or the ball joints they are being impossible. is there a way to get them back in without removing all that bs because it looks like they were takin out without removing anything

I'm pretty sure they have to come out. Just keep trying, they're probably just stuck.

Take a hammer and hit the side of the tie rod end, DO NOT HIT THE BOLT!!!!! and it should break it loose and should pop right off. Same for the ball joints.

Yeah, they definetly have to come out of there. I have mine apart too. If you have access to an air gun, spray the bolts down with pb blaster or some other type to loosen the bolts and put the air gun on there and let it crank on for a bit. They come loose with enough cranking. :thumbsup:

well i will go back out today and give it another shot i want to get this thing back on the road. thanks for the help guys