checking cel?
crzyCollegeKid
02-17-2006, 02:18 PM
on my prelude, i could get the cel code by simply shorting two pins on the service connector and it would flash the code using the actual cel. is there a way to do this on an 03 gts? also, where the heck is the service connector on this car? i know that the entire list of engine codes is on c3g, so i know what to do with it when i get it. its probably that stupid cheapo intake i got off ebay with a vacuum leak. i hear a whistling sound when i accelerate at different rpm's.
eclipsed4utoo
02-17-2006, 03:19 PM
on my prelude, i could get the cel code by simply shorting two pins on the service connector and it would flash the code using the actual cel. is there a way to do this on an 03 gts? also, where the heck is the service connector on this car? i know that the entire list of engine codes is on c3g, so i know what to do with it when i get it. its probably that stupid cheapo intake i got off ebay with a vacuum leak. i hear a whistling sound when i accelerate at different rpm's.
just run down to autozone and get the code scanned. they should give you a print out of the code(s).
the whistling is normal.
with the cheapo intake, where you able to hook up the MAS sensor?(its the black box was connected to the stock air box.)
just run down to autozone and get the code scanned. they should give you a print out of the code(s).
the whistling is normal.
with the cheapo intake, where you able to hook up the MAS sensor?(its the black box was connected to the stock air box.)
Sleepr awd
02-17-2006, 05:02 PM
might be a little dif. cuz ur prelude was obd2 and this car is stupid obd3
good luck getting the code
good luck getting the code
crzyCollegeKid
02-18-2006, 12:10 AM
oh sh!t i didn't know this was obd3. damn. oh well. damn. anyways, yea, it went away before i could check it. all i did was tighten the bolts on the adapter that hooks up the maf. it still whistles, and its driving me crazy, gotta find out where its coming from. oh well, will update :)
Sleepr awd
02-18-2006, 12:49 AM
w/e man the whistle is cool... it turns heads :D makes people kno you are serious man, serious :rofl:
i just like the way mine whistles... yours isn't like annoyingly loud is it? mine is just audible enough that people can hear it and not think my car is going to blow up
i just like the way mine whistles... yours isn't like annoyingly loud is it? mine is just audible enough that people can hear it and not think my car is going to blow up
eclipsed4utoo
02-18-2006, 08:25 AM
might be a little dif. cuz ur prelude was obd2 and this car is stupid obd3
good luck getting the code
nah, its still obd2
good luck getting the code
nah, its still obd2
Sleepr awd
02-18-2006, 06:02 PM
nah, its still obd2
really? i was for sure they switched it all in 2000 :banghead:
really? i was for sure they switched it all in 2000 :banghead:
eclipsed4utoo
02-19-2006, 10:10 AM
really? i was for sure they switched it all in 2000 :banghead:
if it is obd3 then they both have the same numbers. i've had mine scanned a couple of times, and the numbers that came up matched obd2 codes. maybe the manufacturers codes (above P1200) maybe the obd3 codes. but the ones below that match the generic obd2 codes.
if it is obd3 then they both have the same numbers. i've had mine scanned a couple of times, and the numbers that came up matched obd2 codes. maybe the manufacturers codes (above P1200) maybe the obd3 codes. but the ones below that match the generic obd2 codes.
Sleepr awd
02-19-2006, 05:16 PM
good stuff, glad i kno that now! i've never had to have mine coded for anything
Automotive Network, Inc., Copyright ©2026