modding a prowler

if you lowered a prowler .. would it turn?

if you only lowered the rear yes

I would love to see a prowler with large diameter (stock sizes) polished alloy wheels that look like chrome reversed rims with baby moons. Then have a custom tire shop add wide whitewalls to your performance radials. A little hand pinstriping and instant '62! Bet you'd get thumbs ups everywhere!

My dad has an 02' prowler. It's yellow, and i think it would hurt to lower it...for the simple fact that the nose is about 4 inches from the ground. Haha. Once when eating at Applebee's before a prowler parade, a lady wrecked the litte nose under the grill into a curb. HA! So not a good idea to lower... taking the bumpers off and adding a sick system is all the modding u need man! :smokin:

It's true, you should only lower the rear.

..taking the bumpers off and adding a sick system is all the modding u need man! :smokin:

Doing some engine work wouldn't hurt awefully either. The Crossfire has the same engine and, for what the cars are supposed to be, it's somewhat disappointing. Chrysler seems to have a habit of this, minus the 300M.

If you wanted to give the car the appearance of being lower, you'd want to custom fab new front wheel-wells and go bigger on the rims, and lower the car accordingly, so that you maintain the 4 inch clearance.

Pardon, I didn't mean the 300M, but rather the new Hemi 300, I think called the 300C?

The Crossfire has the same engine
I don’t know what you’re talking about but the Prowler dose not have the same engine as the Crossfire. The Crossfire is a rescind MB SLK 230; if you look on the block for the Crossfire you see MB logo's everywhere.

Pardon, I didn't mean the 300M, but rather the new Hemi 300, I think called the 300C?
Yes, the 300C.