2.7 turbo
sittin_slideways
02-13-2006, 06:45 PM
Now i know im going to get ripped for this but, does anyone know where i might be able to find a TURBO setup for a 2.7L tib? I've noticed that there are alot of s/c setups but not t/c
nisco
02-13-2006, 07:12 PM
NGM will be releasing theres, and boostology will be releasing theres soon....
scottsee
02-13-2006, 09:42 PM
I think I should build a turbo kit for these cars and sell them for 1/2 the cost everyone else does.
nisco
02-13-2006, 11:15 PM
I think I should build a turbo kit for these cars and sell them for 1/2 the cost everyone else does.
ill tell you now, do it and youll have customers....
ill tell you now, do it and youll have customers....
scottsee
02-15-2006, 12:24 AM
Everyone spends so much $$ on a "Stage 2 turbo kit" when they are extreamly simple objects. The most complicated thing about force induction is ecu re-maping. And a simple MAF interceptor like a safc2 will do.
I have an endless amount of Hyundai Knolege at my disposal. 5 Hyundai service tech's, and a massive library of Service manual's.
What would you pay for a 400whp turbo & intercooler setup with install and tuning instructions??
I have an endless amount of Hyundai Knolege at my disposal. 5 Hyundai service tech's, and a massive library of Service manual's.
What would you pay for a 400whp turbo & intercooler setup with install and tuning instructions??
nisco
02-15-2006, 01:17 AM
Everyone spends so much $$ on a "Stage 2 turbo kit" when they are extreamly simple objects. The most complicated thing about force induction is ecu re-maping. And a simple MAF interceptor like a safc2 will do.
I have an endless amount of Hyundai Knolege at my disposal. 5 Hyundai service tech's, and a massive library of Service manual's.
What would you pay for a 400whp turbo & intercooler setup with install and tuning instructions??
i would love... LOVE to see you guys get 400 whp from a stock block...
highest to date is 347 i believe, and maybe 409, with pistons i think...
the maf is a pain to tune it correctly youll have to make it a draw through maf, not a blow through
I have an endless amount of Hyundai Knolege at my disposal. 5 Hyundai service tech's, and a massive library of Service manual's.
What would you pay for a 400whp turbo & intercooler setup with install and tuning instructions??
i would love... LOVE to see you guys get 400 whp from a stock block...
highest to date is 347 i believe, and maybe 409, with pistons i think...
the maf is a pain to tune it correctly youll have to make it a draw through maf, not a blow through
762mm
03-30-2006, 09:23 AM
Hi guys, im new here I have a silver 05 tiburon se v6 sixspeed and i have been looking hi and low for turbo chargers for this engine. I read where companies are working on one but never seems to happen. I used to be heavy into mustangs(still am, love turbo'd v8's) but i couldnt resist the beauty of this lil tibby and zippy v6 but def needs a turbo. Any way there is this company called sts turbo and they have a completely diff take on turbo setups that i think will be good for the tibby. There turbo kits are installed in the back of the vehicles with the turbins and impellers altered to compensate for boost. You can go to the link i post to fully understand how it works but basically it makes it to where turbos are very very easy to install on cars. Right now they do not have any demand for turbos for hyundai but they do make a generic do it yourself kit. Just tell them what your engine specs are. Again im new to tibbys so i dont know the capabilities of the v6 and what i can handle but if some knowledgable can goto this site and study up on it and email them to get us all some great specs and actually get the do it yourself kit you could sell the rest of us the blueprints for the fab work that would need to be done(which i am sure will be less than a turbo in the engine compartment) Here the link and i look forward to some input on this thanks.
http://www.ststurbo.com/
http://www.ststurbo.com/
762mm
03-30-2006, 09:30 AM
here is the faq link as well
http://www.ststurbo.com/f_a_q
http://www.ststurbo.com/f_a_q
762mm
04-06-2006, 03:42 PM
hello? its been round a week since i posted. anyof you tibby gurus got any thoughts on this turbo system? :)
nisco
04-06-2006, 06:58 PM
they work, tho im not a fan of them....
dukeblacktibu
04-24-2006, 09:52 PM
hey im new here
anyway let me tell u
if u want something done do it urself
the puertorrican way
check out www.tiburonespr.com
to se no 1 but 2 2.7 v6 single turbo
one is pushin 400.7whp
an the other 410 both on stock internals
if u don believe i have dyno proof
sorry if im being kind of cocky is that i havent seen kits or v6 with a turbo enjoy the site
anyway let me tell u
if u want something done do it urself
the puertorrican way
check out www.tiburonespr.com
to se no 1 but 2 2.7 v6 single turbo
one is pushin 400.7whp
an the other 410 both on stock internals
if u don believe i have dyno proof
sorry if im being kind of cocky is that i havent seen kits or v6 with a turbo enjoy the site
speeddemonGtV6
04-25-2006, 06:10 PM
Ehhh:dunno: :wtf: Ill pay a good 3k for the setup scottsee lol
dukeblacktibu
04-26-2006, 04:11 PM
payin 3k for the kit
plus the extra grand when u blow up the engine
i prefer "EXPERIMENTING" that show's if ur a man or not
LET'S RACE THEN
plus the extra grand when u blow up the engine
i prefer "EXPERIMENTING" that show's if ur a man or not
LET'S RACE THEN
MXlonerider
04-26-2006, 04:19 PM
What if you're female? Then is it ok to buy the kit? heh
dukeblacktibu
04-27-2006, 06:50 PM
i guess so
that'll be the day i'll see a woman driving a t/c tiburon
sorry ladies
that'll be the day i'll see a woman driving a t/c tiburon
sorry ladies
BigTDawg
04-28-2006, 09:50 PM
what if i had a hummer i could just run you over
Automotive Network, Inc., Copyright ©2026
