AEW CAI for 2000 G20??

Anyone know if AEM makes a cold air intake for 2000 G20?

negative me friend ;)

THanks, that's what I thought too. Would you happen to know if an AEM bypass valve would fit on any other CAI? I don't want to risk getting water in my engine.

as long at the pipe diameter is 2.5, 2.75 or 3.0 inches, then yes!

these are the three sizes the BPV comes in...

I believe the HS and PR CAIs are 3.0 inch piping ;)

is there any performance difference between the place racing and hotshot CAI??

I dont believe so.. its just preference, like choosing JWT or Stillen...

b boogie, i know you are planning on doing a write up on the hotshot cai, but ill ask you anyways: was the install difficult?? I read the file at hotshot, and thye said taht you have to cut something off the battery (??) and get a smaller battery.....for you, what did the total cost come to (new battery, cai, andything else?)??

havent gotten it yet.. i ordered it last week. should've come in today but my shop was closed.

you need to cut a bit of the battery tray.

i'll let you know about the battery. i may get an optima, about $100?

the thing is that im really worried about doing anything irreversible to my car......is there a CAI out there that i dont have to do any mods?? Still maybe?? Please do tell me about what happens with your cai!!!

No matter which CAI you get you will have to cut a hole in your engine bay, or enlarge it anyway...


There is a 1 inch hole or so that is utilized by the stock airbox system, you must enlarge this to allow a 3 inch pipe to fit through it.

whereabouts do you have to cut the hole??

the hole you are making is actually enlarging the hole where the stock airbox was. one sidebar with the Place CAI is that the lower tube actually curves in towards the firewall.. i actually shaved off about three inches to make it fit better. the optima battery is smaller and allows to be slid forward and make more room for the CAI. also i tried the AEM bypass but it set off the check engine light three times i tried after resetting the ECU each time. aaaaaand i live in florida and drive cold air all year long, look at the pics of my front end: http://1phatg.innernot.com and get a mental pic of what kind of abuse it takes up front.

-PrimeraGT

well...i hope henry stays away from more cutting of the car..cuz achem..roof antenna ring a bell?? hehe..hmm..i shouldnt be talking either cuz i pulled a "henry" as well with my grill....ask b00gie what happened hahah..

anyway back to the issue...there's viturally no harm to drill the hole bigger and if you have the right drill..it's a 2 min job.
if you are worried, u can always get the JWT or Stillen...and u can always get it from me hehe..thanks!!