transmission/clutch
CHIRS H
02-10-2006, 10:33 PM
what up all you honda heads,i need a little help I Have a 88-CRX With a B16a v-tech
in it and i was driving one day and it then i heard a pop or a bang after
that noise when i put in gear it would not dirve so i removed the
transmission and the clutch was good.:banghead: does any know what the
problem is ,could it be the transmission. thanks and happy racing.:evillol:
in it and i was driving one day and it then i heard a pop or a bang after
that noise when i put in gear it would not dirve so i removed the
transmission and the clutch was good.:banghead: does any know what the
problem is ,could it be the transmission. thanks and happy racing.:evillol:
superbluecivicsi
02-10-2006, 10:47 PM
clutch? axle popped out?
time to start looking.
time to start looking.
Kunundrum
02-11-2006, 12:35 AM
sounds like the Diff Blew up. ... but could be the imput shaft... either way start looking for a new tranny. if you have a S1 and want to keep you gearing and such... i would look for a 90-91 LS transmission, all the parts are interchangable, gears diffs... if it's a YS1 or J1 you want to look for a 92-93 LS/RS/GSR tranny all the parts are interchangable.
if the Diff did blow up and there is no damage to the housing you can pickup a 90-01 LS diff and slap it in the tranny.
if you are not comfortable cracking open the tranny (understandable) just swap it out for a compatible unit so you don't have to change the cluthc disk.
if the Diff did blow up and there is no damage to the housing you can pickup a 90-01 LS diff and slap it in the tranny.
if you are not comfortable cracking open the tranny (understandable) just swap it out for a compatible unit so you don't have to change the cluthc disk.
CHIRS H
02-22-2006, 10:50 PM
what's up i found my problem with the my 88/cr-x the one with the trany/
clutch noise it was the axle it cracked so the when it was in gear
the axle would spin in placed.so i replaced the axle now it works
fine.:)
clutch noise it was the axle it cracked so the when it was in gear
the axle would spin in placed.so i replaced the axle now it works
fine.:)
Automotive Network, Inc., Copyright ©2026
