damn f*ckin thing

im trying to get the fuckin timing sprocket off the end of the crank. i put a puller on it and it broke the little lip that it lips under. so ive heard to hit it with a chisel and hammer and it breaks pretty easy, no luck

im trying to get the fuckin timing sprocket off the end of the crank. i put a puller on it and it broke the little lip that it lips under. so ive heard to hit it with a chisel and hammer and it breaks pretty easy, no luck

use the puller from autozone. Use the une that uses bolts to bolt on the treads on the sproket. I had to go and buy some long bolts from lowes.

I just change the T-belt on my Neon and had a heck of a time getting the pulley off. Use the largest 3-jaw puller that will still fit. It has to grip the outside of the inner part of the pulley. Use the right side engine mount bolt in place of the crank bolt since it's longer. Good luck!

Here is a great post that should help you out...
http://forums.neons.org/viewtopic.php?t=237728