Weld on exhaust tip question
mike65072
02-06-2006, 09:49 PM
I just bought a SS exhaust tip that I will need to weld on the tail pipe. Do I need to disconnect the battery before I start welding (wire welder) so I don't fry the computer(s)...or is that even an issue. Thanks.
sportin83
02-06-2006, 10:37 PM
i dont think it will hurt anything, i have welded on several vehicles and never had any issues. if any one out there thinks there could be a problem chime in any time. but i dont think welding is going to do anything to the vehicle as long as the welder is grounded solid near the welding area.
RyAmber
02-06-2006, 11:55 PM
Okay how scary is it that you will be operating a welder and you would ask a question like that. How on earth could welding a tip onto the tailpipe have anything to do with affecting the electronics of your truck..To confirm your suspicions, ummmmmmmm no disconnecting battery not necessary, just wear safety glasses and a long sleeve shirt at least.
B18B_EG6
02-07-2006, 06:30 AM
well i am a certified welder and i can tell you that it wont hurt your computer. i have welded on so many vehicles without disconecting the battery and never had any trouble.
mike65072
02-07-2006, 09:55 AM
Okay how scary is it that you will be operating a welder and you would ask a question like that. How on earth could welding a tip onto the tailpipe have anything to do with affecting the electronics of your truck...
What's scary is that you can be a such a smart ass when someone asks an honest question. Since the electronics in the truck are grounded and the exhaust system is part of that ground, I thought perhaps there could be a potential problem when the welders ground is also connected...thanks to those who provided the answer without any cheap shots.
What's scary is that you can be a such a smart ass when someone asks an honest question. Since the electronics in the truck are grounded and the exhaust system is part of that ground, I thought perhaps there could be a potential problem when the welders ground is also connected...thanks to those who provided the answer without any cheap shots.
sportin83
02-07-2006, 11:55 AM
its always nice to know everyone is out to help everyone, and not just be a smart ass and make fun of them when they ask a serious ?. good luck with those tips.
JParrott
02-07-2006, 11:58 AM
Okay how scary is it that you will be operating a welder and you would ask a question like that. How on earth could welding a tip onto the tailpipe have anything to do with affecting the electronics of your truck..To confirm your suspicions, ummmmmmmm no disconnecting battery not necessary, just wear safety glasses and a long sleeve shirt at least.
:banhim:
:banhim:
silveradoking
02-07-2006, 04:26 PM
Smart Ass Galorrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr.........!!!!!! !!!!!!
Automotive Network, Inc., Copyright ©2025