crackshaft bot
Neighborpaul
02-06-2006, 05:51 PM
Does anyone know how to remove the crackshaft bolt on a 91 regal. I am trying to replace the crankshaft sensor?? Thanks
Paul
Paul
GTP Dad
02-06-2006, 07:54 PM
Welcome to AF!!
I assume this is a 3.8. They can be hard to remove so an impact wrench is usually the best way to get the bolt to come loose. Other than that a large breaker bar with a socket will work as well. One member puts the breaker bar and socket on and braces the bar on the frame and taps the starter. It works but is not recommended. Good Luck!!
I assume this is a 3.8. They can be hard to remove so an impact wrench is usually the best way to get the bolt to come loose. Other than that a large breaker bar with a socket will work as well. One member puts the breaker bar and socket on and braces the bar on the frame and taps the starter. It works but is not recommended. Good Luck!!
Automotive Network, Inc., Copyright ©2026