SR20DEturbo $$$$$
G20RIDER
08-08-2001, 03:48 AM
This is meant for Luke especially. I was wondering how much would it actually take to buy the engine and install it. Say I buy it from you- does it come with all the wiring, spark plugs, headers, etc. Or is it just the block with the turbo. What is the lowest price I can get for a 99' SR20DE (30,000miles, serviced, never raced-out, hardly taken above 3500rpms as a daily driver). What kind of power can I get at the wheels. Is stick required or optional. You know just a thought to consider.
G22DET
08-10-2001, 04:17 AM
first of all....i'll let you know that i dont give the LOWEST prices on the DET engines. I can actually referr you to a cheap place (since you are in SoCal) to get everything done for dirt cheap....but please remember, what you get is what you pay.
the engine from me, is $1500 plus shipping (you can come pick up as well). These engines will be fully inspected, leaked down, compression tested as well as visual inspections by me or peopel from me shop. all the engine will be very clean as well cuz we clean them, espeically the turbo to get all the gunk out if there's any. $1500 does not include ecu, harness but you can use your factory ones. As for a DE motor...i'll be selling my soon after my installation of the turbo...yes, i do race my car on the tracks, but it is tuned very nicely (mainly stock..only a JWT intake, however, i use all the expensive goodies for the engine hehe). I have 50k miles on it and it's a 99.
the engine from me, is $1500 plus shipping (you can come pick up as well). These engines will be fully inspected, leaked down, compression tested as well as visual inspections by me or peopel from me shop. all the engine will be very clean as well cuz we clean them, espeically the turbo to get all the gunk out if there's any. $1500 does not include ecu, harness but you can use your factory ones. As for a DE motor...i'll be selling my soon after my installation of the turbo...yes, i do race my car on the tracks, but it is tuned very nicely (mainly stock..only a JWT intake, however, i use all the expensive goodies for the engine hehe). I have 50k miles on it and it's a 99.
G20RIDER
08-10-2001, 04:37 AM
Thanks a lot for the help LUKE. But I've been thinking and a whole new engine with a turbo will have to be some time in the future say when I put another 30k miles. This forum just gets me worked up sometimes. Meanwhile I'll just stick with looks and save more money. If your still around then I'll most likely purchase it from you considering that you said everybody elses motors are dirty. J/k :) Lates.
G22DET
08-10-2001, 06:05 AM
i never said anyone's motor is dirty hehe, just that mine are good.
i got tons of stuff for the car so just let me know and i'll get you set up. thanks
i got tons of stuff for the car so just let me know and i'll get you set up. thanks
2002G20Racer
08-10-2001, 02:19 PM
Hmmmm want 2 get a DET into my car but wont it void my 7 year warrintie. Also live in Cali and im sure that baby wont pass smog. Also have a 2002 if that causes any probs... What should I do???
G22DET
08-10-2001, 02:27 PM
it wont pass smog for sure and definitly ruins your warranty...it's an upgrade for serious performance folks i guess.
RCer
08-10-2001, 04:09 PM
however, i use all the expensive goodies for the engine hehe
Luke, can you explain what are the expensive goodies?
Luke, can you explain what are the expensive goodies?
P10DET
08-10-2001, 08:36 PM
Originally posted by 2002G20Racer
Hmmmm want 2 get a DET into my car but wont it void my 7 year warrintie.
Ayyup! :D
Originally posted by 2002G20Racer
What should I do???
Well, you have a difficult choice to make that only you can make. :D
Hmmmm want 2 get a DET into my car but wont it void my 7 year warrintie.
Ayyup! :D
Originally posted by 2002G20Racer
What should I do???
Well, you have a difficult choice to make that only you can make. :D
P10DET
08-10-2001, 08:38 PM
Originally posted by G22DET
it wont pass smog for sure ...
Correction, it won't pass the visual inspection in The People's Republic of California. :D
It will however pass the sniffer test. I totally expect mine to pass the smog test here (sniffer).
it wont pass smog for sure ...
Correction, it won't pass the visual inspection in The People's Republic of California. :D
It will however pass the sniffer test. I totally expect mine to pass the smog test here (sniffer).
2002G20Racer
08-11-2001, 01:42 AM
Shouldnt have got that extended warintie.
G22DET
08-11-2001, 01:52 PM
yeh..wont pass visual for sure...some stupid people here in CA, right when they see an air filter, they call it a pollution hog and not pass you.
that's why you find underground connection.....;)
that's why you find underground connection.....;)
MOMOG20
08-13-2001, 12:23 AM
Originally posted by 2002G20Racer
Shouldnt have got that extended warintie.
when did you buy the car??
because i actually buy them to but i told my dealer about getting turbo and aftermaket stuff so i got refuned but not full!!!
just let you know^.^
Shouldnt have got that extended warintie.
when did you buy the car??
because i actually buy them to but i told my dealer about getting turbo and aftermaket stuff so i got refuned but not full!!!
just let you know^.^
endfro
08-13-2001, 02:52 PM
Wow, only $1500 for the SR20DEt?
I can drop one of those in my P10 correct? Because when I can, I'll definitely buy one of those.
I can drop one of those in my P10 correct? Because when I can, I'll definitely buy one of those.
b-b00gie
08-13-2001, 07:36 PM
that is for the engine only.
you will need another $2000 to $3000 on top of that for other parts needed.
you will need another $2000 to $3000 on top of that for other parts needed.
P10DET
08-13-2001, 11:10 PM
Originally posted by b-b00gie
that is for the engine only.
you will need another $2000 to $3000 on top of that for other parts needed.
Yep!
Look for a SR20DET installation kit for the P10 from Hotshot. I talked with John Spangler (owner of Hotshot) and he's going to send me some mandrel bends so I can make another set of pipes (I can do a little better job next time) to use to make a kit. :)
He's not sure about the demand. I'll let y'all know when he has the pipes. You can then show your demand. Please don't bug him just yet though. He doesn't even have the pipes.
The kit will include a HKS front mount intercooler, IC pipes, intake pipe, and he will probably supply a JWT ECU if you don't have one so you can do one stop shopping. John's a great guy and owns a 200SX SE-R. He's friends with much of the SoCal SR20 community.
that is for the engine only.
you will need another $2000 to $3000 on top of that for other parts needed.
Yep!
Look for a SR20DET installation kit for the P10 from Hotshot. I talked with John Spangler (owner of Hotshot) and he's going to send me some mandrel bends so I can make another set of pipes (I can do a little better job next time) to use to make a kit. :)
He's not sure about the demand. I'll let y'all know when he has the pipes. You can then show your demand. Please don't bug him just yet though. He doesn't even have the pipes.
The kit will include a HKS front mount intercooler, IC pipes, intake pipe, and he will probably supply a JWT ECU if you don't have one so you can do one stop shopping. John's a great guy and owns a 200SX SE-R. He's friends with much of the SoCal SR20 community.
G20er
08-14-2001, 12:00 AM
Hey Geo,
Would a downpipe be included in this kit too?
L8R
G20er
Would a downpipe be included in this kit too?
L8R
G20er
AWD Primera
08-14-2001, 02:35 AM
What car is the DET originally coming from, Pulsar or Bluebird. What years were those cars produced?:confused:
P10DET
08-14-2001, 07:20 AM
Originally posted by G20er
Hey Geo,
Would a downpipe be included in this kit too?
L8R
G20er
Yes it would. I knew I was forgetting something.
Hey Geo,
Would a downpipe be included in this kit too?
L8R
G20er
Yes it would. I knew I was forgetting something.
P10DET
08-14-2001, 07:33 AM
Originally posted by AWD Primera
What car is the DET originally coming from, Pulsar or Bluebird. What years were those cars produced?:confused:
I, like most people, used a Bluebird DET. The Hotshot kit will be for a Bluebird engine.
I'm not certain of the years of production.
What car is the DET originally coming from, Pulsar or Bluebird. What years were those cars produced?:confused:
I, like most people, used a Bluebird DET. The Hotshot kit will be for a Bluebird engine.
I'm not certain of the years of production.
G20er
08-15-2001, 12:30 AM
Originally posted by P10DET
Yep!
Look for a SR20DET installation kit for the P10 from Hotshot. I talked with John Spangler (owner of Hotshot) and he's going to send me some mandrel bends so I can make another set of pipes (I can do a little better job next time) to use to make a kit. :)
He's not sure about the demand. I'll let y'all know when he has the pipes. You can then show your demand. Please don't bug him just yet though. He doesn't even have the pipes.
The kit will include a HKS front mount intercooler, IC pipes, intake pipe, and he will probably supply a JWT ECU if you don't have one so you can do one stop shopping. John's a great guy and owns a 200SX SE-R. He's friends with much of the SoCal SR20 community.
Geo,
Perhaps you can talk to John about a group buy option. Savings for the G20 SR20DET guys :D and some assurance of a minimum number of kits John would be able to sell...
L8R
G20er
Yep!
Look for a SR20DET installation kit for the P10 from Hotshot. I talked with John Spangler (owner of Hotshot) and he's going to send me some mandrel bends so I can make another set of pipes (I can do a little better job next time) to use to make a kit. :)
He's not sure about the demand. I'll let y'all know when he has the pipes. You can then show your demand. Please don't bug him just yet though. He doesn't even have the pipes.
The kit will include a HKS front mount intercooler, IC pipes, intake pipe, and he will probably supply a JWT ECU if you don't have one so you can do one stop shopping. John's a great guy and owns a 200SX SE-R. He's friends with much of the SoCal SR20 community.
Geo,
Perhaps you can talk to John about a group buy option. Savings for the G20 SR20DET guys :D and some assurance of a minimum number of kits John would be able to sell...
L8R
G20er
P10DET
08-15-2001, 12:36 AM
Originally posted by G20er
Perhaps you can talk to John about a group buy option. Savings for the G20 SR20DET guys :D and some assurance of a minimum number of kits John would be able to sell...
That might be possible. It might also ensure that the kit gets produced. I have to get off my fat ass and let him know what pipes I need.
Perhaps you can talk to John about a group buy option. Savings for the G20 SR20DET guys :D and some assurance of a minimum number of kits John would be able to sell...
That might be possible. It might also ensure that the kit gets produced. I have to get off my fat ass and let him know what pipes I need.
G20er
08-15-2001, 09:40 PM
Originally posted by P10DET
That might be possible. It might also ensure that the kit gets produced. I have to get off my fat ass and let him know what pipes I need.
Geo, keep us informed of the progress.:flash:
L8R
G20er
That might be possible. It might also ensure that the kit gets produced. I have to get off my fat ass and let him know what pipes I need.
Geo, keep us informed of the progress.:flash:
L8R
G20er
Automotive Network, Inc., Copyright ©2025