1996 Escort stereo install help please

1996 Escort and i got a install kit, but when i went ot plug everything in a noticed the factory clip was cut they only left 2 wires attached.

can someone help me with attaching the wires from my install wire harness to the factory wires. the harness for the speaker wires are fine just the main side has been cliped.

could you please tell me what numbers go to what numbers.

this is my moms car, if it was mine i would just buy a factory wire harness but my mom wants something cheap so i got a refurbished setup and im haveing issues with the wires.

looks easy to figure out but im irritated :)

http://www.auphanclan.com:8080/forums/forum_library/attachments/101_1_1138706322.jpg



http://www.auphanclan.com:8080/forums/forum_library/attachments/101_2_1138706322.jpg

http://www.auphanclan.com:8080/forums/forum_library/attachments/101_3_1138706322.jpg

OK... i posted this in 3 other forums and got replys on everyone. i figured snce there was so many members and i posted in this section i could get some quik help but i geuss not...:nono:

the top picture tells you where everything goes, by the numbers even

If you haven't gotten it yet it's pretty easy you have everything you need to answer your question in the two pics. Number 1 on harness kit would be the amp turn on(remote) wire, number 4 on the harness kit would go to the red with black strip wire, number 5 on the harness kit would go to the blue with black stripe wire, number 6 on the harness kit would go to the blue with red stripe wire, number 3 on the harness kit would go to the black wire for ground, and it doesn't look like it has power ant. so number 2 on the harness kit would not need to be connected.