Dyno'd it again today
B16a4me
06-19-2002, 09:19 AM
Well the drags were cancelled so I had some money burning a whole in my pocket so I went back to Croydon for another go on the dyno. I waited for a while but they got tied up with some Datsun 200sx, so I went out and got my car dynoed at a place I won't mention.
Anyway they had this MDX Dyno and were talking it up so I thought I may as well give it a go due to the burning sensation from my pocket.
WHOLLY @#$%$#!!!!!!!!!! They ramped the thing up so slowly the power run took about 3 minutes!!! You should have heard my poor baby getting the ring revved out of her!!!!!! Would have been over 7000 revs for over a minute!!!!!!!!!!
Croydons power run was just like accelerating in third but todays little effort was like climbing Everest in 5th!!!! The poor baby spat some blue smoke at the end of it and idled like a rotary for about 30 seconds. AND THEN HE SAID, "WELL LETS TRY THAT AGAIN". I nicely asked him to step the @#$# away from my car.
I think I'll be returning to Croydon in future as todays little effort probably took 10000 k's off my engine!!!!!!!!!!!!!!!
Anyway they had this MDX Dyno and were talking it up so I thought I may as well give it a go due to the burning sensation from my pocket.
WHOLLY @#$%$#!!!!!!!!!! They ramped the thing up so slowly the power run took about 3 minutes!!! You should have heard my poor baby getting the ring revved out of her!!!!!! Would have been over 7000 revs for over a minute!!!!!!!!!!
Croydons power run was just like accelerating in third but todays little effort was like climbing Everest in 5th!!!! The poor baby spat some blue smoke at the end of it and idled like a rotary for about 30 seconds. AND THEN HE SAID, "WELL LETS TRY THAT AGAIN". I nicely asked him to step the @#$# away from my car.
I think I'll be returning to Croydon in future as todays little effort probably took 10000 k's off my engine!!!!!!!!!!!!!!!
Setanta
06-19-2002, 09:26 AM
So what output did they get anyway? ;)
B16a4me
06-19-2002, 09:34 AM
Oh yeah forgot that bit. 101kw but I have compared it to the Croydon one and it is exactly the same curve but about 5 Kw higher. Make your own deductions but I might be back at Croydon tommorrow to confirm.
Spunkymonkey
06-19-2002, 08:24 PM
Originally posted by B16a4me
Oh yeah forgot that bit. 101kw but I have compared it to the Croydon one and it is exactly the same curve but about 5 Kw higher. Make your own deductions but I might be back at Croydon tommorrow to confirm.
You've got money burning through your pocket, and your not finding other ways to lighten the car???? :silly2:
hmmmm....ok, so this place you went to, doesn't sound too flash.
Oh yeah forgot that bit. 101kw but I have compared it to the Croydon one and it is exactly the same curve but about 5 Kw higher. Make your own deductions but I might be back at Croydon tommorrow to confirm.
You've got money burning through your pocket, and your not finding other ways to lighten the car???? :silly2:
hmmmm....ok, so this place you went to, doesn't sound too flash.
Spunkymonkey
06-20-2002, 12:43 AM
How much are Croydon asking for another dyno run Chuck?
B16a4me
06-20-2002, 01:51 AM
$70 but you have to just turn up and wait for the dyno to become available.
Today I went to Bob Wynn in Seven Hills who has a Dyno Dynamics dyno. Did a run 86Kw. Guy operating it says "where's your tacho?" I says, "It's got a rev limiter just tag that" He gives me strange look :D
I'll be going back to this place in future. It's not far from my home (cheaper to tow home), they were easy on the car and were INTERESTED in it. I don't mind paying if I get customer service.
Power curve was identical to the Croydon one but kept going :cool: Where the Croydon one made 91.8 (143kph) todays one made 82. So on the day at Croydon it probably would have made 96 to 97.
I went around to MAZSPORT and saw AJC's car getting worked on (probably for the turbo titles)
Anyway that was todays little adventure
Today I went to Bob Wynn in Seven Hills who has a Dyno Dynamics dyno. Did a run 86Kw. Guy operating it says "where's your tacho?" I says, "It's got a rev limiter just tag that" He gives me strange look :D
I'll be going back to this place in future. It's not far from my home (cheaper to tow home), they were easy on the car and were INTERESTED in it. I don't mind paying if I get customer service.
Power curve was identical to the Croydon one but kept going :cool: Where the Croydon one made 91.8 (143kph) todays one made 82. So on the day at Croydon it probably would have made 96 to 97.
I went around to MAZSPORT and saw AJC's car getting worked on (probably for the turbo titles)
Anyway that was todays little adventure
Spunkymonkey
06-20-2002, 03:47 AM
Originally posted by B16a4me
$70 but you have to just turn up and wait for the dyno to become available.
Today I went to Bob Wynn in Seven Hills who has a Dyno Dynamics dyno. Did a run 86Kw. Guy operating it says "where's your tacho?" I says, "It's got a rev limiter just tag that" He gives me strange look :D
I'll be going back to this place in future. It's not far from my home (cheaper to tow home), they were easy on the car and were INTERESTED in it. I don't mind paying if I get customer service.
Power curve was identical to the Croydon one but kept going :cool: Where the Croydon one made 91.8 (143kph) todays one made 82. So on the day at Croydon it probably would have made 96 to 97.
I went around to MAZSPORT and saw AJC's car getting worked on (probably for the turbo titles)
Anyway that was todays little adventure
So how much at Bob Wynn then? why would you need to tow your car home?? :p
oh, why is there such a difference in kw readouts, is it just different types of dyno??
yeah, AJC will be running his car on the weekend at Heathcote, I'm sure it will be karted down soon. He's getting 380kw at the wheels from the beast.
$70 but you have to just turn up and wait for the dyno to become available.
Today I went to Bob Wynn in Seven Hills who has a Dyno Dynamics dyno. Did a run 86Kw. Guy operating it says "where's your tacho?" I says, "It's got a rev limiter just tag that" He gives me strange look :D
I'll be going back to this place in future. It's not far from my home (cheaper to tow home), they were easy on the car and were INTERESTED in it. I don't mind paying if I get customer service.
Power curve was identical to the Croydon one but kept going :cool: Where the Croydon one made 91.8 (143kph) todays one made 82. So on the day at Croydon it probably would have made 96 to 97.
I went around to MAZSPORT and saw AJC's car getting worked on (probably for the turbo titles)
Anyway that was todays little adventure
So how much at Bob Wynn then? why would you need to tow your car home?? :p
oh, why is there such a difference in kw readouts, is it just different types of dyno??
yeah, AJC will be running his car on the weekend at Heathcote, I'm sure it will be karted down soon. He's getting 380kw at the wheels from the beast.
B16a4me
06-20-2002, 07:18 AM
$70 as well but were in a negotiation process re: development and future dyno usage.
No too dynos have the same setup. I'm not really interested in the number, just consistant readings
Asked Mazsport for a dyno reading and they suggested I go some where else :confused:
No too dynos have the same setup. I'm not really interested in the number, just consistant readings
Asked Mazsport for a dyno reading and they suggested I go some where else :confused:
Spunkymonkey
06-20-2002, 07:51 AM
Originally posted by B16a4me
$70 as well but were in a negotiation process re: development and future dyno usage.
No too dynos have the same setup. I'm not really interested in the number, just consistant readings
Asked Mazsport for a dyno reading and they suggested I go some where else :confused:
oh ok.....
yeah, croydon can be lacking in customer service skills :rolleyes:
Like I didn't have to wait a long time for my gold studs on my rims :rolleyes:
well atleast it sounds like this place you went to is alright. How often are you going to dyno your car then?
Mazsport deal with mostly Rx7's. perhaps they are too busy...I don't know.
$70 as well but were in a negotiation process re: development and future dyno usage.
No too dynos have the same setup. I'm not really interested in the number, just consistant readings
Asked Mazsport for a dyno reading and they suggested I go some where else :confused:
oh ok.....
yeah, croydon can be lacking in customer service skills :rolleyes:
Like I didn't have to wait a long time for my gold studs on my rims :rolleyes:
well atleast it sounds like this place you went to is alright. How often are you going to dyno your car then?
Mazsport deal with mostly Rx7's. perhaps they are too busy...I don't know.
B16a4me
06-20-2002, 07:59 AM
Mondays, Wednesdays and Fridays :D
Nah after every mod..............Hmmm, maybe it will be Mondays, Wednesdays and Fridays hehehhe
Yeah, I appear to be the wrong nationality for most workshops....did I say that out loud..........I'm having problems with my inner monologue
Nah after every mod..............Hmmm, maybe it will be Mondays, Wednesdays and Fridays hehehhe
Yeah, I appear to be the wrong nationality for most workshops....did I say that out loud..........I'm having problems with my inner monologue
Spunkymonkey
06-20-2002, 08:07 AM
Originally posted by B16a4me
Mondays, Wednesdays and Fridays :D
Nah after every mod..............Hmmm, maybe it will be Mondays, Wednesdays and Fridays hehehhe
Yeah, I appear to be the wrong nationality for most workshops....did I say that out loud..........I'm having problems with my inner monologue
LOL :p
so every time you find another bolt to take out of the car to reduce the weight, you will be chucking it on the dyno :p
perhaps you should get a brown wig, start talking like every 2nd word that comes out of your mouth is "sick...fully sick" :p
Mondays, Wednesdays and Fridays :D
Nah after every mod..............Hmmm, maybe it will be Mondays, Wednesdays and Fridays hehehhe
Yeah, I appear to be the wrong nationality for most workshops....did I say that out loud..........I'm having problems with my inner monologue
LOL :p
so every time you find another bolt to take out of the car to reduce the weight, you will be chucking it on the dyno :p
perhaps you should get a brown wig, start talking like every 2nd word that comes out of your mouth is "sick...fully sick" :p
B16a4me
06-20-2002, 08:10 AM
I'm actually gonna start chasing power soon. The parts are on their way from all over the planet. :cool: :cool: :cool:
Spunkymonkey
06-20-2002, 08:15 AM
Originally posted by B16a4me
I'm actually gonna start chasing power soon. The parts are on their way from all over the planet. :cool: :cool: :cool:
if you want power..... you could always just turn your key to the 2nd rung :p oh, and starting the car might help too :p
what mods you have planned??
I'm actually gonna start chasing power soon. The parts are on their way from all over the planet. :cool: :cool: :cool:
if you want power..... you could always just turn your key to the 2nd rung :p oh, and starting the car might help too :p
what mods you have planned??
Spunkymonkey
06-20-2002, 09:16 AM
Oh, nice signature you have there chuck :p
B16a4me
06-20-2002, 09:28 AM
I thought you'd like :D
Spunkymonkey
06-20-2002, 09:34 AM
Originally posted by B16a4me
I thought you'd like :D
:hehehe:
alright Good night all :)
I've had enough of this 10 hour time delay :rolleyes:
I thought you'd like :D
:hehehe:
alright Good night all :)
I've had enough of this 10 hour time delay :rolleyes:
Spunkymonkey
06-21-2002, 07:03 PM
Originally posted by B16a4me
I thought you'd like :D
What happened? you didn't want to keep the sig "Theres an old bald man driving that thing" too long :p
OH, and in reference to your current sig "When I get older" .....
you already ARE older :hehehe:
I thought you'd like :D
What happened? you didn't want to keep the sig "Theres an old bald man driving that thing" too long :p
OH, and in reference to your current sig "When I get older" .....
you already ARE older :hehehe:
Automotive Network, Inc., Copyright ©2026