96 Taurus-Sable Door Handle Sticking

I was wondering if anyone else has had this problem and how to remove the switch. I can't see how it is attached to the lock mechanism. Below is the TSB that was put out by Ford. Any help is appreciated. In case anyone needs the part number of the new switch itis: F7DZ13752AA Thanks

Door Handles TSB 97-15-2

--------------------------------------------------------------------------------

97-15-2, Publication Date: JULY 21, 1997



FORD:

1996 TAURUS

LINCOLN-MERCURY:

1995-96 CONTINENTAL

1996 SABLE

This TSB article is being republished in its entirety to update the model year coverage.

ISSUE:

The outside front door handles may have high efforts and/or feel rough when operating and may become more pronounced in cold and/or wet conditions. This may be caused by illuminated entry switch contact with the door operating mechanism.

ACTION:

Replace the illuminated entry switch. The switch has been revised to improve contact with the operating mechanism. Refer to the following text for details.

Perform normal diagnostics as outlined in Section 01-14A of the 1996 Taurus/Sable or Continental Service Manual. If no concern is found, replace the illuminated entry switch. Follow the procedure outlined in Section 17-02 of the Service Manual.

NOTE:

IF A SWITCH IS REPLACED ON ONE SIDE OF THE VEHICLE, BE SURE TO REPLACE THE OPPOSITE SIDE AS WELL.



OTHER APPLICABLE ARTICLES: NONE

SUPERSEDES: 96-25-1

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

LABOR ALLOWANCE



DEALER CODING



OASIS CODES: 112000, 201000, 201100